Reply by tien vuong June 26, 20062006-06-26
Hi Pablo,

--- Pablo Luis wrote:

> Is DSP/BIOS the only way to program the
> internal peripherals of my DSK?? If there is
> another, where can I find the information??

You can use CSL (Chip Support Library) to program
internal periplerals of your DSK (with or without
DSP/BIOS). CSL API for C6000 is described in
http://focus.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=spru401

> Where can I find examples of exercise of
> this device using any of the peripherals that DSK
> has??

You may find the examples you want in your CCS
installation directory or in DDK (Driver Development
Kit)
http://focus.ti.com/dsp/docs/dspsupportatn.tsp?sectionId=3&tabIdB7&familyIdD&toolTypeIdC

Tien
Reply by Pablo Luis June 23, 20062006-06-23
Hi,

My name is Pablo Luis Sordo Martez and I am doing my Final
Degree Project with a Texas Instruments DSP (TSM320C6713). I have
many questions about it because I am learning by myself as much as I
can. My project consists in connecting two DSPs between them and
sending signals one to each other and monitorize that that occurs
properly. I know I have to use McBSP two make possible the
connection, but I have some questions:

Is DSP/BIOS the only way to program the internal
peripherals of my DSK?? If there is another, where can I find the
information??
Where can I find a Code Composer Manual in Spanish??,
because although my English is quite good, it's being a bit
difficult to go fast in English.
Where can I find examples of exercise of this device using
any of the peripherals that DSK has??

I think that's all, but I suppose that I'll ask again and
again, so be pacient with me please.

Thanks for all,

Pablo L.