> Hi, I am a c6713 user too. What you have
to do is use the two CCSs,
> version 3.1 and version 2.1. In my case, the second one has the dsk6713
drivers,
> which are not included in the 3.1. So I use 3.1 to simulate my programs with
the
> c6713 simulator configuration and I use 2.1 to load my programs on the
board.
>
> Don't worry because these two versions don't cause
conflcts between
> themselves.
That's great you figured this out and can help others. But it sucks that
TI can't
include v3.1 in the DSK 6713 kit. How can TI expect students to figure out they
need
2 separate versions of CCS for different purposes? I wonder who has dropped the
ball
there, TI or Spectrum Digital?
-Jeff > -
> From: 2...@alunos.isel.ipl.pt
> Reply-To: 2...@alunos.isel.ipl.pt
> To: c...
> Subject: [c6x] CCS v3.1- PE and DSK C6713 problems
> Date: Sat, 10 Feb 2007 08:07:18 -0500
>
> Hello,
>
> I'm a student trying to work with Real Time Workshop and DSK
C6713.
> Because of the Link to Code Composer Studio in the Malab2006a I must
use
> CCS v3.1, but the Kit only bring the CCS v2.1.
> After I install the CCS v3.1- PE and try to import the 'driver'
of DSK
> C6713 existing in CCS v2.1 the setup from CCS v3.1 give one error
saying
> 'Check that device drivers actually exist'.
> What can I do to overcome this problem? if is necessary diferent
drivers
> were can i make the download?
Reply by ●February 13, 20072007-02-13
Hi, I am a c6713 user too. What you have to do is use the two CCSs, version 3.1
and version 2.1. In my case, the second one has the dsk6713 drivers, which are
not included in the 3.1. So I use 3.1 to simulate my programs with the c6713
simulator configuration and I use 2.1 to load my programs on the board.
Don't worry
because these two versions don't cause conflcts between themselves.
Good luck,
Pablo
L.
From: 2...@alunos.isel.ipl.pt Reply-To:
2...@alunos.isel.ipl.pt To: c... Subject: [c6x] CCS v3.1-
PE and DSK C6713 problems Date: Sat, 10 Feb 2007 08:07:18
-0500
Hello,
I'm a student trying to work with Real Time Workshop and
DSK C6713. Because of the Link to Code Composer Studio in the Malab2006a I must
use CCS v3.1, but the Kit only bring the CCS v2.1. After I install the CCS
v3.1- PE and try to import the 'driver' of DSK C6713 existing in CCS
v2.1 the setup from CCS v3.1 give one error saying 'Check that device
drivers actually exist'. What can I do to overcome this problem? if is
necessary diferent drivers were can i make the download?
Note: If you do a simple "reply" with your email client, only the
author of this message will receive your answer. You need to do a
"reply all" if you want your answer to be distributed to the entire
group.
Reply by 2610...@alunos.isel.ipl.pt●February 12, 20072007-02-12
Hello,
I'm a student trying to work with Real Time Workshop and DSK C6713. Because
of the Link to Code Composer Studio in the Malab2006a I must use CCS v3.1, but
the Kit only bring the CCS v2.1.
After I install the CCS v3.1- PE and try to import the 'driver' of DSK
C6713 existing in CCS v2.1 the setup from CCS v3.1 give one error saying
'Check that device drivers actually exist'.
What can I do to overcome this problem? if is necessary diferent drivers were
can i make the download?