Reply by Harshad S Dave December 18, 20012001-12-18

hi all I am using SHARC 21061 ezkit lite kit. I am trying to interface DSP with
PC on serial prot

I had more or less achived the task

AS i start i capture the UART and Reintialise UART and I use my protocols
for communication. The whole thing work fine if i do host boot.

But in case of EPROM boot, I fail to communicate. It seems that
Kernel/loader of EZ-kit lite dose not allow to capture the port .. Can anybody guide me what could be the problem

Is anybody tried to do the same.

Thanks in advance

harshad