harshiddh wrote:
> Hi,
> 
> Processor : DM642
> Tool      : CCS3.1
> 
>      While doing software reset from the CCS3.1, Previously it was working
> properly and suddenly i am getting error message as 
> 
> Failed Software Reset: Error 0x00000024/-1147 Error during: Register,
> Execution,  It appears that the target is being held in reset.  If this is
> a multi-core system, the master CPU may not be releasing the DSP from
> reset.  Please check your configuration in CCSetup and/or your GEL file to
> ensure that nothing is blocking the DSP from being released from reset  
> Sequence ID: 16 Error Code: -1147 Error Class: 0x00000024
> 
> and the CCS 3.1 hangs. Anyone has face this kind of problem, or what can
> be the cause of this error and is there any solution for that?
> 
> 
> 

Have you probed the reset line?  Perhaps something actually IS holding 
the device in reset.

Hi,

Processor : DM642
Tool      : CCS3.1

     While doing software reset from the CCS3.1, Previously it was working
properly and suddenly i am getting error message as 

Failed Software Reset: Error 0x00000024/-1147 Error during: Register,
Execution,  It appears that the target is being held in reset.  If this is
a multi-core system, the master CPU may not be releasing the DSP from
reset.  Please check your configuration in CCSetup and/or your GEL file to
ensure that nothing is blocking the DSP from being released from reset  
Sequence ID: 16 Error Code: -1147 Error Class: 0x00000024

and the CCS 3.1 hangs. Anyone has face this kind of problem, or what can
be the cause of this error and is there any solution for that?