Reply by Vladimir Vassilevsky October 17, 20072007-10-17
"neelufar.2005" <neelufar.2005@gmail.com> wrote in message
news:K7Sdndlhc4p4CYjanZ2dnUVZ_ualnZ2d@giganews.com...
> Hello All, > > I am searching for the method to detect if there is residual echo or not > in the output of acoustic echo cancellation.
There is always some residual echo. The question is how much of echo.
> So that if the acoustic echo > cancellation does 100% cancellation of echo
100% - never. 90% - could be.
> then there is no need of using > residual echo suppression module after the acoustic echo cancellation > module. Can any one help regarding bypassing the residula echo suppression > module.
Sure. The usual consulting rates apply. Vladimir Vassilevsky DSP and Mixed Signal Consultant www.abvolt.com
Reply by neelufar.2005 October 17, 20072007-10-17
Hello All,

I am searching for the method to detect if there is residual echo or not
in the output of acoustic echo cancellation. So that if the acoustic echo
cancellation does 100% cancellation of echo then there is no need of using
residual echo suppression module after the acoustic echo cancellation
module. Can any one help regarding bypassing the residula echo suppression
module.
Thanks in advance.

Regards,
Neelufar.