Hi William,
you only need to get the latest code generation tools. You should
install theses in a new subfolder under the CCS installation directory,
e.g. c:\ccstudio\c6000\cgtools5.1.11
Finally you must select the new tools in
Help - About - Component Manager - Build Tools - TMS320C67XX
Regards,
Adolf Klemenz, D.SignT
At 08:02 11.03.2007 -0700, William C Bonner wrote:
>I am doing development on a custom board connected to
my machine via a
>Spectrum Digital XDS510USB JTAG device..
>
>The board I'm working with is based on a TMS320C6713 dsp.
>
>When I bring up the about box for code composer studio, I get Code
>Composer Studio Version 3.1.23, and code generation tools v5.1.0.
>
>If I do a check for updates under the Help->Update Advisor it lists
>optional code generation tools updates. Then under the C6000 downloads
>it lists
>
>C6000 Code Generation Tools v5.1.6 Windows through v5.1.11.
>
>If I wanted to be running the latest patched version of the code
>generation tools, do I need to just get the 5.1.11? Or do I need to get
>all of the interim stuff?
>
>The installer for this wants to put it in c:\program Files\something,
>where the original code composer ctudio was installed under c:\CCStudio
>Should I try to point this software at some point under the \ccstudio
>path, or let it go where it wants?
>
>I've seen reference to CCS 3.3 and am wondering if the user interface
is
>much improved from the 3.1 that I'm currently using?
>