On Nov 7, 9:04 pm, "lsw00kor" <lsw00...@hotmail.com> wrote:
> Hello, everyone.
>
> In SISO-OFDM, we usually employ a frequency domain equalization after the
> receiver FFT module, as a way to compensate for the channel distortion
> along frequency bins. We depend on OFDM channel estimation and simple
> inversion for this purpose.
>
> In MIMO-OFDM, either multiplexed system or diversity system, what is the
> best way to implement a frequency-domain equalization for the MIMO
> receiver?
>
> I understand that there are papers about MIMO-FDE for FFT-IFFT-based
> single-carrier system. However, as for MIMO-OFDM, I didn't gomf smu
> [s[rt/
>
> Can I have some advice, please?
> Thank you very much.
Hello, everyone.
In SISO-OFDM, we usually employ a frequency domain equalization after the
receiver FFT module, as a way to compensate for the channel distortion
along frequency bins. We depend on OFDM channel estimation and simple
inversion for this purpose.
In MIMO-OFDM, either multiplexed system or diversity system, what is the
best way to implement a frequency-domain equalization for the MIMO
receiver?
I understand that there are papers about MIMO-FDE for FFT-IFFT-based
single-carrier system. However, as for MIMO-OFDM, I didn't gomf smu
[s[rt/
Can I have some advice, please?
Thank you very much.