Reply by rachana nagal January 22, 20072007-01-22
thanks a lot for ur reply.....
sir actually i tried CCS3.1 with 6711dsk after copying the drivers of
6711(from version 2.10)..but it will not detect the dsk and 've not shown in
set up configuration......

Rachana
On 1/19/07, Jeff Brower wrote:
>
> Rachana-
>
> > can i use CCS3.1 with 6711dsk..we have CCS2.1 with our board but i want
> to
> > use CCS3.1 with this kit ....i've install the drivers os 6711 in CCS3.1but
> > still it's not working...
>
> Answer I think is 2-part: 1, yes you can get it to work, 2 you have to
> use the JTAG
> header on the 6711 DSK card with an emulator and set one of the
> user-switches to
> activate the header instead of using JTAG circuit via PC parallel port.
>
> My understanding is that the only versions of CCS that were shipped with
> DSK 6711
> (and therefore have built-in DSK 6711 parallel port-to-JTAG support) are
> v2.2x.
>
> I could be wrong about this -- if anyone's got v3.1 working without
> external emulator
> then please let Rachana know.
>
> -Jeff
>
Reply by Jeff Brower January 21, 20072007-01-21
Rachana-

> thanks a lot for ur reply.....
> sir actually i tried CCS3.1 with 6711dsk after copying the drivers of
> 6711(from version 2.10)..but it will not detect the dsk and 've not shown in
> set up configuration......

Where's the CD that came with DSK? I suggest to try that first, verify everything is working Ok, then try v3.1 and
compare results.

-Jeff

> On 1/19/07, Jeff Brower wrote:
>>
>> Rachana-
>>
>> > can i use CCS3.1 with 6711dsk..we have CCS2.1 with our board but i want
>> to
>> > use CCS3.1 with this kit ....i've install the drivers os 6711 in CCS3.1but
>> > still it's not working...
>>
>> Answer I think is 2-part: 1, yes you can get it to work, 2 you have to
>> use the JTAG
>> header on the 6711 DSK card with an emulator and set one of the
>> user-switches to
>> activate the header instead of using JTAG circuit via PC parallel port.
>>
>> My understanding is that the only versions of CCS that were shipped with
>> DSK 6711
>> (and therefore have built-in DSK 6711 parallel port-to-JTAG support) are
>> v2.2x.
>>
>> I could be wrong about this -- if anyone's got v3.1 working without
>> external emulator
>> then please let Rachana know.
>>
>> -Jeff
Reply by Jeff Brower January 19, 20072007-01-19
Rachana-

> can i use CCS3.1 with 6711dsk..we have CCS2.1 with our board but i want to
> use CCS3.1 with this kit ....i've install the drivers os 6711 in CCS3.1 but
> still it's not working...

Answer I think is 2-part: 1, yes you can get it to work, 2 you have to use the JTAG
header on the 6711 DSK card with an emulator and set one of the user-switches to
activate the header instead of using JTAG circuit via PC parallel port.

My understanding is that the only versions of CCS that were shipped with DSK 6711
(and therefore have built-in DSK 6711 parallel port-to-JTAG support) are v2.2x.

I could be wrong about this -- if anyone's got v3.1 working without external emulator
then please let Rachana know.

-Jeff
Reply by rach...@gmail.com January 19, 20072007-01-19
hi to all
can i use CCS3.1 with 6711dsk..we have CCS2.1 with our board but i want to use CCS3.1 with this kit ....i've install the drivers os 6711 in CCS3.1 but still it's not working...

plz help me..
With Regards
Rachana