Reply by ln1554 May 20, 20082008-05-20
Hi,

I am using eZdsp2812 from Spectrum Digital and I want to use the TI
example named flash to program the flash. I set the jumper as described
bellow: 
JP1 = 2-3
JP7 = 1-2
JP9 = 1-2

I tried to program the flash using On-Chip Flash programmer and Code
Composer studio 3.1. I selected the operation erase-program and verify and
start the execution. I got the following message : erase in progress ...
And nothing happens.
What is wrong?
I also tried to program only and it doesn't work.

I hope, someone can help me.
Thanks

Helene