Hi,
When I tried RTDX, the HSRTDX have some problem on the DM6437EVM, normal
RTDX speed is quit slow. Finally, I give up using RTDX on DM6437.
DM6437 provided the PCI model. it's much better than using RTDX. You
can
use that model to develop your code.
There are also some use cases that I put into website:
http://dhcodec.quikstream.com.au/ .
Explaination and sample code are available in my source code.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Best Regards
Tonald DL
WebSite: http://dhcodec.quikstream.com.au/
2007/11/15, rowkajjh :
>
> Hello,
>
> I do have a TMS320DM6437 Evaluation Module and tried to get RTDX to
> work. Therefore I have to define the .rtdx_data and the .rtdx_text
> sections. I tried it this way:
>
> ################################
> _RTDX_interrupt_mask = ~0x00001808;
> /*_RTDX_interrupt_mask = 0x0;*/
>
> -l rts64plus.lib
> -l c:\CCStudio_v3.3\boards\evmdm6437_v2\lib\evmdm6437bsl.lib
> -l c:\CCStudio_v3.3\bios_5_31_07\packages\ti\rtdx\lib\c6000\rtdx.lib
>
> /* Specifies the heap/stack size, in words */
> -stack 0x10000 /* Stack Size */
> -heap 0x8000000 /* Heap Size */
>
> MEMORY
> {
> L2RAM: o = 0x10800000 l = 0x00020000
> DDR2: o = 0x80000000 l = 0x10000000
> }
>
> SECTIONS
> {
> .bss > L2RAM
> .cinit > L2RAM
> .cio > L2RAM
> .const > L2RAM
> .data > L2RAM
> .far > L2RAM
> .stack > L2RAM
> .switch > L2RAM
> .sysmem > DDR2
> .text > L2RAM
> .ddr2 > DDR2
>
> .pinit {} > L2RAM
> .rtdx_data {} > DDR2
> .rtdx_text {} > L2RAM
> }
> ########################################
>
> But when I try to recieve data in my hostapp I always get
> 'ENoDataAvailable' (I use the tutorial which came wich CCS (section
1
> lesson 1 - revieve an int)). Where could be the problem?
>
> Thanks in advance!
> Bye.
>
--