Reply by Vladimir Vassilevsky●June 26, 20082008-06-26
"polpet" <alessandro.polpetta@diei.unipg.it> wrote in message
news:z9WdnQf-v-JsKP7VnZ2dnUVZ_qjinZ2d@giganews.com...
> Can anyoune help me "for free".
>
> It's an university research project... I have not so much money!!!
>
Then get some money before going into the projects.
> Thanks
> Polpet
Always welcome.
VLV
>
> >
> >
> >polpet wrote:
> >
> >
> >
> >> I have developed a firmware application for my TMS320F28335 with the
> help
> >> of Code Composer Studio and the eZdspf28335.
> >>
> >> The application works (quite) well in debug mode, thus I want to
> finally
> >> program the flash on-chip memory in order to have the dsp working
> >> immediately after a reset without the need of the jtag interface and
> >> debug.
> >>
> >> Now I'm trying to understand how to program the flash memory and I
> find
> >> the SPRA8958G application report on "Running an Application from
> Internal
> >> Memory on the TMS320F28xxx DSP". I tried to use the sample projects
> found
> >> in the corresponding zip file but it doesn't work: when I program the
> DSP
> >> with the F28335_example_nonBIOS_ram, all work properly, but when I use
> the
> >> F28335_example_nonBIOS_flash program, I have the following error:
> "Target
> >> halted during Flash operation. Flash operation aborted."
> >>
> >> I have programmed the flash memory of the DSP using F28xxx On-Chip
> Flash
> >> Programmer that I find under Tool and I have correctly modified the
> SW1
> >> switch on the eZdspf28335 in order to have a jump to flash in boot
> load
> >> option.
> >>
> >> Which would be the problem?
> >> Can anyone help me?
> >
> >I can certainly read the manuals for you, but not here and not for free.
> >
> >
> >VLV
> >
Reply by Richard Owlett●June 26, 20082008-06-26
polpet wrote:
> Can anyoune help me "for free".
>
> It's an university research project... I have not so much money!!!
>
> Thanks
>
> Polpet
>
>
I went to http://www.google.com/search?sourceid=mozilla&q=diei.unipg.it
[notice I used the Google server(s) located in USA]
The first 10 hits seemed to have a number of people at your university
that may be able to solve your problem or point you in the right direction.
I don't speak Italian and was using Google's automatic translation facility.
Good luck.
[And don't take VLV too personally ;]
Reply by polpet●June 26, 20082008-06-26
Can anyoune help me "for free".
It's an university research project... I have not so much money!!!
Thanks
Polpet
>
>
>polpet wrote:
>
>
>
>> I have developed a firmware application for my TMS320F28335 with the
help
>> of Code Composer Studio and the eZdspf28335.
>>
>> The application works (quite) well in debug mode, thus I want to
finally
>> program the flash on-chip memory in order to have the dsp working
>> immediately after a reset without the need of the jtag interface and
>> debug.
>>
>> Now I'm trying to understand how to program the flash memory and I
find
>> the SPRA8958G application report on "Running an Application from
Internal
>> Memory on the TMS320F28xxx DSP". I tried to use the sample projects
found
>> in the corresponding zip file but it doesn't work: when I program the
DSP
>> with the F28335_example_nonBIOS_ram, all work properly, but when I use
the
>> F28335_example_nonBIOS_flash program, I have the following error:
"Target
>> halted during Flash operation. Flash operation aborted."
>>
>> I have programmed the flash memory of the DSP using F28xxx On-Chip
Flash
>> Programmer that I find under Tool and I have correctly modified the
SW1
>> switch on the eZdspf28335 in order to have a jump to flash in boot
load
>> option.
>>
>> Which would be the problem?
>> Can anyone help me?
>
>I can certainly read the manuals for you, but not here and not for free.
>
>
>VLV
>
Reply by Vladimir Vassilevsky●June 25, 20082008-06-25
polpet wrote:
> I have developed a firmware application for my TMS320F28335 with the help
> of Code Composer Studio and the eZdspf28335.
>
> The application works (quite) well in debug mode, thus I want to finally
> program the flash on-chip memory in order to have the dsp working
> immediately after a reset without the need of the jtag interface and
> debug.
>
> Now I'm trying to understand how to program the flash memory and I find
> the SPRA8958G application report on "Running an Application from Internal
> Memory on the TMS320F28xxx DSP". I tried to use the sample projects found
> in the corresponding zip file but it doesn't work: when I program the DSP
> with the F28335_example_nonBIOS_ram, all work properly, but when I use the
> F28335_example_nonBIOS_flash program, I have the following error: "Target
> halted during Flash operation. Flash operation aborted."
>
> I have programmed the flash memory of the DSP using F28xxx On-Chip Flash
> Programmer that I find under Tool and I have correctly modified the SW1
> switch on the eZdspf28335 in order to have a jump to flash in boot load
> option.
>
> Which would be the problem?
> Can anyone help me?
I can certainly read the manuals for you, but not here and not for free.
VLV
Reply by polpet●June 25, 20082008-06-25
Dear all,
I have developed a firmware application for my TMS320F28335 with the help
of Code Composer Studio and the eZdspf28335.
The application works (quite) well in debug mode, thus I want to finally
program the flash on-chip memory in order to have the dsp working
immediately after a reset without the need of the jtag interface and
debug.
Now I'm trying to understand how to program the flash memory and I find
the SPRA8958G application report on "Running an Application from Internal
Memory on the TMS320F28xxx DSP". I tried to use the sample projects found
in the corresponding zip file but it doesn't work: when I program the DSP
with the F28335_example_nonBIOS_ram, all work properly, but when I use the
F28335_example_nonBIOS_flash program, I have the following error: "Target
halted during Flash operation. Flash operation aborted."
I have programmed the flash memory of the DSP using F28xxx On-Chip Flash
Programmer that I find under Tool and I have correctly modified the SW1
switch on the eZdspf28335 in order to have a jump to flash in boot load
option.
Which would be the problem?
Can anyone help me?
Thank you,
Polpet