Hi Erez, It's hard to say what the issue could be here. There are a couple of possible things to check: 1) Be sure that you are applying the appropriate power to the MSC8101ADS board. I'm assuming this probably isn't the issue and you've already checked it, but this can certainly cause major communication problems if power is being applied improperly. 2) What kind of setup do you have? Is your computer a laptop or desktop? One thing to try is try using all of the different LPT port combinations to see if any of them work. I can explain the concept behind it later but try it first and let me know how it goes. Also provide as much information about your setup if you are still having problems..... Hope this helps, Ron Erez Tal wrote: > I'm trying to get codewarrior to connect to a 8101ADS board but I keep > getting a message that the board is not connected. I'm using > Codewarrior > for starcore v1.1 and I'm connecting to the board through the parallel > port with the wiggler. I'm loading the MSC8101 stationary and > when I try > and run the project I get a message ccs_error_cable_disconnect. Of > course the cable is connected and I checked the CSS settings and they > seem find. What am I missing here? Is there anything special I need to > get this setup to work? > Any advice would be appreciated. > Thanks, > Erez Tal -- ** CodeWarrior Wireless Java Development Kit ** Now you can target the iDEN i85s phone for J2ME wireless development Contacts: Brian or Matt Metrowerks, maker of CodeWarrior - "Software Starts Here" Ron Liechty - - http://www.metrowerks.com |