Hello Ketan,
On Jan 2, 2008 12:06 AM, ketan deshpande wrote:
>
> Hello Everybody,
>
> We have the new EVMDM648 and are trying to connect the JTAG to it.
> When we try in SDConfig then we get the following messages
>
> ** Emulator Test **
> $$ EmuProductName=XDS510PP_PLUS
> $$ EmuPortAddr=0x378
> $$ EmuPortMode=SPP8
> $$ ProductId
> $$ ProductVersion
> ** Emulator Scan Test
> -- Found JTAG IR length of 6
> -- Found 1 JTAG device(s) in the scan chain
> But when we try to connect it using CCS 3.3 then we fail to do so.
>
> I was also wondering if the IR length of 6 is correct for the C64xx+ type
of
> devices?
IR==6 is correct for 64+ devices [the ones that I have seen].
Make sure that you have CCS and SD updates - even if you ordered the
emulator and EVM at the same time.
I think that you have a software problem - assuming that CCS setup is
correct.
mikedunn
> Any guidelines for that?
>
> regards,
> -Ketan
>
> ________________________________
> Get the freedom to save as many mails as you wish. Click here to know how.
>
--
www.dsprelated.com/blogs-1/nf/Mike_Dunn.php