Forums

VisualDSP++ 2.0 and 3.0 and VDK

Started by Jack Potrymajlo February 7, 2003
Hello,

I have problem with VisualDSP++ 3.0

I use ADSP-21160 as target on Ez-kit Lite.

General tab in about dialog:
VisualDSP++ 3.0
IDDE Version: Version 6.0.0.0
Build Date: Aug 9 2002
Installation Directory: C:\Program Files\Analog Devices\VisualDSP
Components tab:
Debug Target Ez-kit Lite USB(ADSP-21160) 1.00.1 by Analog
Devices Inc
Symbol Manager:
DWARF Symbol Manager DLL 3.1.8.5 by Analog Devices Inc.
Processor Library:
ADSP-21XXX Family Processor DLL 2.2.0.13 by Analog Devices Inc.

I use Windows XP HOME operating system.

Description of problem:

I installed VisualDSP++ 2.0 for SHARC processor with EZ-kit Lite
21160
software. I choose all option(ide,documentation,compiler etc.).
I tryed to
generate project with VDK support and project was
compiled. Everything was OK (Project was not linked because
there was
limitation of code size but this is not problem). Then I have
installed
VisualDSP++ 3.0 (ide,documentation,compiler etc.) with Ez-kit
2191 software.
I wanted to have project
for ADSP-21160 processor as target with VDK support. VisualDSP++
3.0
generated files vdk.cpp and vdk.h, but errors occured while
compilation.

Those are lines were errors occured:

%DebugBuild%#define VDK_INCLUDE_INSTRUMENTATION_

and

#ifdef __ECC__ // for C/C++ access
enum DeviceID
{
%C_DeviceEnumList%
last_device__3VDK
};
#else // for asm access
%ASM_DeviceEnumList%
#endif // __ECC__

How to use both Ez-kits on the same system. I tryed to install
Ez-kit Update but installator found that all files was up to
date and didn't copy files.

I hope that is detailed description of my problem. If someone
knows how to solve it, I'll be gratefull regards

Jacek Potrymajlo

-----------------------------
WSTAW swoje ZDJIE do nowego KONTAKTu! < http://kontakt.wp.pl




Have you tried to install VDSP++ 2.0 for SHARC _OVER_ VDSP++ 3.0 for 21xx?

JaaC

 Jack Potrymajlo <j...@wp.pl> wrote:

Hello,

I have problem with VisualDSP++ 3.0

I use ADSP-21160 as target on Ez-kit Lite.

General tab in about dialog:
VisualDSP++ 3.0
IDDE Version: Version 6.0.0.0
Build Date: Aug 9 2002
Installation Directory: C:\Program Files\Analog Devices\VisualDSP
Components tab:
Debug Target Ez-kit Lite USB(ADSP-21160) 1.00.1 by Analog
Devices Inc
Symbol Manager:
DWARF Symbol Manager DLL 3.1.8.5 by Analog Devices Inc.
Processor Library:
ADSP-21XXX Family Processor DLL 2.2.0.13 by Analog Devices Inc.

I use Windows XP HOME operating system.

Description of problem:

I installed VisualDSP++ 2.0 for SHARC processor with EZ-kit Lite
21160
software. I choose all option(ide,documentation,compiler etc.).
I tryed to
generate project with VDK support and project was
compiled. Everything was OK (Project was not linked because
there was
limitation of code size but this is not problem). Then I have
installed
VisualDSP++ 3.0 (ide,documentation,compiler etc.) with Ez-kit
2191 software.
I wanted to have project
for ADSP-21160 processor as target with VDK support. VisualDSP++
3.0
generated files vdk.cpp and vdk.h, but errors occured while
compilation.

Those are lines were errors occured:

%DebugBuild%#define VDK_INCLUDE_INSTRUMENTATION_

and

#ifdef __ECC__ // for C/C++ access
enum DeviceID
{
%C_DeviceEnumList%
last_device__3VDK
};
#else // for asm access
%ASM_DeviceEnumList%
#endif // __ECC__

How to use both Ez-kits on the same system. I tryed to install
Ez-kit Update but installator found that all files was up to
date and didn't copy files.

I hope that is detailed description of my problem. If someone
knows how to solve it, I'll be gratefullregards

Jacek Potrymajlo

-----------------------------
WSTAW swoje ZDJIE do nowego KONTAKTu! < http://kontakt.wp.pl

_____________________________________
Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group.

_____________________________________
About this discussion group:

To Join: Send an email to a...@yahoogroups.com

To Post: Send an email to a...@yahoogroups.com

To Leave: Send an email to a...@yahoogroups.com

Archives: http://groups.yahoo.com/group/adsp

Other Groups: http://www.dsprelated.com/groups.php3