DSPRelated.com
Forums
   Forums    More Forums    adsp  

VisualDSP++ and Tcl

Started by Jack Potrymajlo ●February 20, 2004
Hi,

I read visualDSP documentation about Tcl script. Is it possible
to run VisualDSP load program to Ezkit and exit form VDSP?
Of course when I use "idde -f tclsript" form command line VDSP
is executed but If exist switch which not shows main application
window? Is it possible to do this without using Tcl?

regards

Jacek

----------------
Nowy konkurs Cyfrowego Polsatu - "Animaster"
Ogldaj w niedziel22 lutego o godz. 23:30
http://klik.wp.pl/?adr=http%3A%2F%2Fwww.cyfrowypolsat.pl%2Fkonkurs&sid5




Reply by russell_washington ●February 23, 20042004-02-23
Jacek --

VisualDSP++ 3.5, available for Blackfin and 218x/219x and "coming
soon" for SHARC and TigerSHARC, has a more flexible Automation API.
Looking in the on-line help that ships with 3.5 (note that I have
not done this myself), the ADspApplication object includes
a "Visible" property that (quoting the documentation) "Gets or sets
a flag that determines if the application window is visible." That
sound like what you need.

You did not say which processor or version of VDSP you are using, so
this information may or not may be relavant to your particular
situation. :)

RUSS

--- In , "Jack Potrymajlo" <j.potrymajlo@w...>
wrote:
> Hi,
>
> I read visualDSP documentation about Tcl script. Is it possible
> to run VisualDSP load program to Ezkit and exit form VDSP?
> Of course when I use "idde -f tclsript" form command line VDSP
> is executed but If exist switch which not shows main application
> window? Is it possible to do this without using Tcl?
>
> regards
>
> Jacek



Reply by Jack Potrymajlo ●February 24, 20042004-02-24

----- Original Message -----
From: "russell_washington" <>
To: <>
Sent: Monday, February 23, 2004 6:33 PM
Subject: [adsp] Re: VisualDSP++ and Tcl > Jacek --
>
> VisualDSP++ 3.5, available for Blackfin and 218x/219x
and "coming
> soon" for SHARC and TigerSHARC, has a more flexible Automation
API.
> Looking in the on-line help that ships with 3.5 (note that I
have
> not done this myself), the ADspApplication object includes
> a "Visible" property that (quoting the documentation) "Gets or
sets
> a flag that determines if the application window is visible."
That
> sound like what you need.
>
> You did not say which processor or version of VDSP you are
using, so
> this information may or not may be relavant to your particular
> situation. :)
>
> RUSS

RUSS, thank you for your answer.
It's really what I needed. Now I know what should I search. My
VisualDSP++ release is 3.0 for SHARC processor. On ADI site I
founded that I can use Automation API and COM technology in this
release but I can't find documentation to do it. Is there this
property only in full license VDSP?
Where could I find documentation to use automation API with
VisualDSP?

regards
Jacek ----------------
U nas oferty wycieczek z gwarancj najniszej ceny!
Jeli w innym biurze znajdziesz taniej, zwrimy Ci ric
http://klik.wp.pl/?adr=http%3A%2F%2Fturystyka.wp.pl%2Fwycieczki.html&sid2




Reply by russell_washington ●February 24, 20042004-02-24
Unfortunately, I believe that the Automation interface is new to
VisualDSP++ *3.5*. 3.0 "only" has the Tcl interface, which does not
seem to have the ability to suppress the rendering of the main
window.
RUSS