Forums

Installation of VisualDSP++ 3.5 for 32 bit

Started by Jaime Andres Aranguren Cardona April 24, 2004
Hi,

I'm having problems installing VisualDSP++ 3.5 for 32
bits under Win98SE (Spanish) running on a laptop.
Everything goes fine, until almost the end of the
"Copying new files" step; from that point (almost at
the end, when everything is almost done), it starts to
roll back, literally the status is "Rolling back
action", and the progress bar decreases, and at the
end I get a message box satying that the installation
failed, and that I should try again later.

Has anyone had similar problems? The strange part is
that it installed flawlessly on another laptop running
WinXP Home Edition, but the installation of
VisualDSP++ 3.5 for 16 bits and its march/04 update
was fine on the laptop running Win98SE.

Any hints, please?

Regards,

JaaC

=====

Jaime Andr Aranguren Cardona

__________________________________



I saw this too on my secondary machine. I happens only under
Windows 98. Email and let them know
you've hit the "VisualDSP++ 3.5 32-bit Windows 98 install problem"
(I think the error code is 2717). A patch is available.
RUSS

--- In , Jaime Andres Aranguren Cardona
<jaime_aranguren@y...> wrote:
> Hi,
>
> I'm having problems installing VisualDSP++ 3.5 for 32
> bits under Win98SE (Spanish) running on a laptop.
> Everything goes fine, until almost the end of the
> "Copying new files" step; from that point (almost at
> the end, when everything is almost done), it starts to
> roll back, literally the status is "Rolling back
> action", and the progress bar decreases, and at the
> end I get a message box satying that the installation
> failed, and that I should try again later.
>
> Has anyone had similar problems? The strange part is
> that it installed flawlessly on another laptop running
> WinXP Home Edition, but the installation of
> VisualDSP++ 3.5 for 16 bits and its march/04 update
> was fine on the laptop running Win98SE.
>
> Any hints, please?
>
> Regards,
>
> JaaC
>
> =====
>
> Jaime Andr Aranguren Cardona
> jaime.aranguren@i...
> jaime.aranguren@c... > __________________________________
>





I should have checked the ADI web site first. :) The problem I
think you have is discussed here:

http://www.analog.com/processors/technicalSupport/toolsAnomalies.html
#tar18856

RUSS

--- In , "russell_washington"
<russell_washington@y...> wrote:
> I saw this too on my secondary machine. I happens only under
> Windows 98. Email dsptools.support@a... and let them know
> you've hit the "VisualDSP++ 3.5 32-bit Windows 98 install problem"
> (I think the error code is 2717). A patch is available.
> RUSS
>




Hi

Does anyone has experience with AD7490? Have you ever try to manage CS with TFS
and RFS as suggested in datasheet?
In my case doesn't work with ADSP2191, help greatly appreciated

thanks in advance

Stephane


Hi Rusell,

Thanks a lot! Effectively, the solution is here:
http://www.analog.com/processors/technicalSupport/toolsAnomalies.html#tar18856

I'll run the workaround.

Regards,

JaaC --- russell_washington <>
wrote:
> I saw this too on my secondary machine. I happens
> only under
> Windows 98. Email and
> let them know
> you've hit the "VisualDSP++ 3.5 32-bit Windows 98
> install problem"
> (I think the error code is 2717). A patch is
> available.
> RUSS
>
> --- In , Jaime Andres Aranguren
> Cardona
> <jaime_aranguren@y...> wrote:
> > Hi,
> >
> > I'm having problems installing VisualDSP++ 3.5 for
> 32
> > bits under Win98SE (Spanish) running on a laptop.
> > Everything goes fine, until almost the end of the
> > "Copying new files" step; from that point (almost
> at
> > the end, when everything is almost done), it
> starts to
> > roll back, literally the status is "Rolling back
> > action", and the progress bar decreases, and at
> the
> > end I get a message box satying that the
> installation
> > failed, and that I should try again later.
> >
> > Has anyone had similar problems? The strange part
> is
> > that it installed flawlessly on another laptop
> running
> > WinXP Home Edition, but the installation of
> > VisualDSP++ 3.5 for 16 bits and its march/04
> update
> > was fine on the laptop running Win98SE.
> >
> > Any hints, please?
> >
> > Regards,
> >
> > JaaC
> >
> > =====
> >
> > Jaime Andr Aranguren Cardona
> > jaime.aranguren@i...
> > jaime.aranguren@c...
> >
> >
> >
> >
> >
> > __________________________________
> >
>
> _____________________________________
> Note: If you do a simple "reply" with your email
> client, only the author of this message will receive
> your answer. You need to do a "reply all" if you
> want your answer to be distributed to the entire
> group.
>
> _____________________________________
> About this discussion group:
>
> To Join: Send an email to > To Post: Send an email to
>
> To Leave: Send an email to > Archives: http://groups.yahoo.com/group/adsp
>
> Other Groups: http://www.dsprelated.com/groups.php3
>
> Yahoo! Groups Links >


=====

Jaime Andr Aranguren Cardona

__________________________________