|
> -----Ursprgliche Nachricht----- > Von: Alessandro [SMTP:] > Gesendet am: Donnerstag, 22. Juli 2004 19:21 > An: > Betreff: [adsp] ADSP-21992 FLASH PROGRAMMER > > Hi all, > i have a trouble with an ADSP-21992 EZ-KIT. > When i try to load the flash driver (with the flash programmer) i > receive an error message: > "COULD NOT ALLOCATE STORAGE FOR BUFFER WHILE EXECUTING COMMAND 'NO > COMMAND'" > > I use new release of visualDSP++, 3.5 but without the update. > > What can i do to solve my problem? > > Thanks very much!!! If there's an update available, install it. (As I found, the release notes don't indicate all differences always.) There are good reasons why updates exist - most often to solve such misbehaviour. If it doesn't help, ask again. |
|
|
AW: ADSP-21992 FLASH PROGRAMMER
Started by ●July 23, 2004
Reply by ●July 24, 20042004-07-24
|
http://www.analog.com/processors/processors/ADSP/crosscore/toolsUpgrades/index.h\ tml > > Hi all, > > i have a trouble with an ADSP-21992 EZ-KIT. > > When i try to load the flash driver (with the flash programmer) i > > receive an error message: > > "COULD NOT ALLOCATE STORAGE FOR BUFFER WHILE EXECUTING COMMAND 'NO > > COMMAND'" > > > > I use new release of visualDSP++, 3.5 but without the update. > > > > What can i do to solve my problem? > > > > Thanks very much!!! > > If there's an update available, install it. > (As I found, the release notes don't indicate all differences always.) > > There are good reasons why updates exist - most often to solve such misbehaviour. > > If it doesn't help, ask again. |
