Hi every one in the Group, I am kalpana working on ADSP 21060 processor. In my application I need to use two ADSP 21060 processors. My intention is to use the processors in Cluster multiprocessing. I am not able to take a decision about the connections of BR# pins CPA# & RPBA pins. Hardware wise how will I connect them so that both that i use the facilities of Cluster Multiprocessing. If anyone of u could tell me how to do this, it would be of help for me. |
|
Query about ADSP 21060 processor
Started by ●October 11, 2004
Reply by ●October 11, 20042004-10-11
On Mon, 11 Oct 2004, bhupathikalpana wrote: > Hi every one in the Group, > I am kalpana working on ADSP 21060 processor. In my application I > need to use two ADSP 21060 processors. My intention is to use the > processors in Cluster multiprocessing. I am not able to take a > decision about the connections of BR# pins CPA# & RPBA pins. Hardware > wise how will I connect them so that both that i use the facilities > of Cluster Multiprocessing. If anyone of u could tell me how to do > this, it would be of help for me. for RPBA, decide if you want to use rotating or fixed priority. With only 2 processors, it shouldn't really matter that much, but it's still a choice you need to make. Then tie that line high or low on both processors. For CPA, do you want each processor to be able to interrupt DMA's in progress? If not, don't connect CPA to anything. Connect BR1->BR1 and BR2->BR2 on both processors. Make sure one processor is ID1 and the other is ID2. Tie BR3 thru BR6 high on both processors. Sounds like a fun project! Patience, persistence, truth, Dr. mike |