SPORT for modem plz have a lookSTEV holle,Jaac
Started by ●April 8, 2005
hello every budy.
i wanted to use sport0 for setting the modem of seimens company fpr the GSM use .which uses AT comands.
one simple task alreday it connected in hardware so i cant use UART and i do not use DMA thing for seting the SPORT.
according to my requriment can u help .
using sport0 i have to transmit an word called 'AT' to modem ,this modem will respond automatically back with an relpy 'OK', on Terminal.as it is already connceted sport0 to modem of seimens.
plz any one help me to set this simple thing ,
well i am using ADSPBF532 with Blackfin summit Ice on VisualDSp++ 3.1
can u help me accordingly to above.
just tell me the stepswhich one to intialize for transmiting and receving
and for interrupts .
i have gone thru the sport0 thing but it is not easyas UART i am not able to under stand how to use the status reg of sport and also config reg also.
just help only with this thing and from next time i won't trouble u again. i will be wating for ur reply
Reply by ●April 8, 20052005-04-08
> alreday it connected in hardware so i cant use UART and i do
> [stuff deleted]
> plz any one help me to set this simple thing ,
> [stuff deleted]
> i have gone thru the sport0 thing but it is not easyas UART
RTFM, then go back to start.
Friedrich
> -----Original Message-----
> From: ajax_narayan@ajax... [mailto:ajax_narayan@ajax...]
> Sent: Friday, April 08, 2005 8:59 AM
> To: adsp@adsp...
> Subject: [adsp] SPORT for modem plz have a lookSTEV holle,Jaac >
>
> hello every budy.
> i wanted to use sport0 for setting the modem of seimens
> company fpr the GSM use .which uses AT comands.
>
> one simple task > alreday it connected in hardware so i cant use UART and i do
> not use DMA thing for seting the SPORT. according to my
> requriment can u help .
>
> using sport0 i have to transmit an word called 'AT' to modem
> ,this modem will respond automatically back with an relpy
> 'OK', on Terminal.as it is already connceted sport0 to modem
> of seimens.
>
> plz any one help me to set this simple thing ,
>
> well i am using ADSPBF532 with Blackfin summit Ice on
> VisualDSp++ 3.1 can u help me accordingly to above.
>
> just tell me the stepswhich one to intialize for transmiting
> and receving and for interrupts .
>
> i have gone thru the sport0 thing but it is not easyas UART i
> am not able to under stand how to use the status reg of sport
> and also config reg also.
>
> just help only with this thing and from next time i won't
> trouble u again. > i will be wating for ur reply >
