Hello list,
I had to uninstall VisualDSP++ 3.5 this morning as it would not open a
debug session, and I installed VisualDSP++ 4.0 which I downloaded from
the Analog Devices site.
I'm trying to build a project that worked just fine on Friday evening
but is now giving me the following error:
----------------Configuration: *ProjectName* - Debug----------------
.\ADSP-21262_CPP.LDF
[Warning li2060] The following input section(s) that contain program code
and/or data have not been placed into the executable for
processor 'p0'
as there are no relevant commands specified in the LDF:
libcpp.dlb[nomemory2126x_rev_0.0.doj](seg_vtbl)
[Error li1060] The following symbols are referenced, but not mapped:
'___vtbl__9bad_alloc' referenced from
libcpp.dlb[nomemory2126x_rev_0.0.doj](seg_pmco)
'___vtbl__9exception' referenced from
libcpp.dlb[nomemory2126x_rev_0.0.doj](seg_pmco)
Linker finished with 1 error and 1 warning
cc3089: fatal error: Link failed
Tool failed with exit/exception code: 1.
Build was unsuccessful.
----
I looked up the help file to see what exactly the error is and what
remedial action is suggested.
This is what it says about fixing li1060:
How to Fix
Add an LDF command to map the necessary section.
How do I go about this in Expert Linker?
My system:
Windows 2000 Pro; VisualDSP++ Release 4.0 + Update; Target ADSP-21262.
