passing audio to BlackFin

HI all

I am using ADI BlackFin EZ-KIT LITE 533 for porting an audion decoder..i did
poting by runnning my code through VDSP++
but now i want to take audio directly from the Blackfin Kit's AUDIO PORT,
I have no clue ,PLease tell steps to be followed for doing this.....

1-- Say i want to listen the audio through my PC Speakers or Headphones so
how can i do this....means connection..
2-- i also want to punt my code in FLASH and i dont know how to do this??

please guide me or give some idea so that i will procede further
thanks
--
Little things affect little minds

Jai Shiv
chandresh
09891787733 Start a New Thread

Hi,

(1) Use the ADI supplied audio TalkThru code... it will be in one of the
folders in VDSP++ installation directory... you need to connect output from
PC to one of the audio i/p jacks on the EZ-kit.. and headphones/speakers to
one of the o/p jacks on the kit.. details of connectors and other set up
will be given in read_me.txt file
(2) Refer to the EE-240 on the following link, it gives a detailed
information on booting, LDR generation and flash programming
http://www.analog.com/processors/resources/technicalLibrary/appNotes.html

kunal
On 5/1/06, chandresh wrote:
>
> HI all
>
> I am using ADI BlackFin EZ-KIT LITE 533 for porting an audion decoder..i
> did poting by runnning my code through VDSP++
> but now i want to take audio directly from the Blackfin Kit's AUDIO
> PORT, I have no clue ,PLease tell steps to be followed for doing this.....
>
> 1-- Say i want to listen the audio through my PC Speakers or Headphones so
> how can i do this....means connection..
> 2-- i also want to punt my code in FLASH and i dont know how to do this??
>
> please guide me or give some idea so that i will procede further
> thanks
> --
> Little things affect little minds
>
> Jai Shiv
> chandresh
> 09891787733
>
>
> ------------------------------
>

--
That which does not kill, makes us stronger Start a New Thread

Hi.

Try the talkthru demo. That will give you an idea.

JaaC

--- chandresh wrote:

> HI all
>
> I am using ADI BlackFin EZ-KIT LITE 533 for porting
> an audion decoder..i did
> poting by runnning my code through VDSP++
> but now i want to take audio directly from the
> Blackfin Kit's AUDIO PORT,
> I have no clue ,PLease tell steps to be followed for
> doing this.....
>
> 1-- Say i want to listen the audio through my PC
> Speakers or Headphones so
> how can i do this....means connection..
> 2-- i also want to punt my code in FLASH and i dont
> know how to do this??
>
> please guide me or give some idea so that i will
> procede further
> thanks
Jaime Andr Aranguren Cardona
j...@ieee.org
j...@computer.org
__________________________________________________ Start a New Thread