hai ,
i was working with serial port interface in 21062 dsp,
and my ldf file shows error.
" wrong memory specifier type for portseg"
in .ldf file i wrote
portseg=(DM PORT) (start=0x0420 0000 end =ox0420 00ff)
(syntax here is not correct )
any another method for segment specifier?
error in memory specifier type for portseg in .ldf for serial port interface
Started by ●January 16, 2007
Reply by ●January 16, 20072007-01-16
On Tue, 16 Jan 2007, joshymjose2000 wrote:
>
> hai ,
> i was working with serial port interface in 21062 dsp,
> and my ldf file shows error.
> " wrong memory specifier type for portseg"
>
> in .ldf file i wrote
> portseg=(DM PORT) (start=0x0420 0000 end =ox0420 00ff)
> (syntax here is not correct )
> any another method for segment specifier?
You don't need the key word PORT. that's a left over from the 21020
series. Just tell it RAM and it should be happy.
Patience, persistence, truth,
Dr. mike
>
> hai ,
> i was working with serial port interface in 21062 dsp,
> and my ldf file shows error.
> " wrong memory specifier type for portseg"
>
> in .ldf file i wrote
> portseg=(DM PORT) (start=0x0420 0000 end =ox0420 00ff)
> (syntax here is not correct )
> any another method for segment specifier?
You don't need the key word PORT. that's a left over from the 21020
series. Just tell it RAM and it should be happy.
Patience, persistence, truth,
Dr. mike