hi guys, just recently heard about this ADSP egroups, and was kinda hoping if anyone here could help me. i am currently undertaking a project upon which i would interface 4 stereo audio codecs to an ADSP 21065L EZ Kit Lite board through its serial ports. i was wondering if anyone of you could give me a hand on the parts list i would be needing for this project. I would be using the same components that make up the on-board single audio codec. unfortunately, i don't know the manufacturer's number of the parts in this board. more specifically the 3.3V to 5V voltage level converter as well as the 24.5?? MHz clock. well, since i am here already, i would also wish that could you include me in this egroups so i could have updates as well on other applications for the ADSPs. thanks. Jaeson Paras |
|
multiple audio codec interface to ADSP 21065L
Started by ●October 14, 2001
Reply by ●October 15, 20012001-10-15
wrote: > hi guys, just recently heard about this ADSP egroups, > and was kinda hoping if anyone here could help me. i > am currently undertaking a project upon which i would > interface 4 stereo audio codecs to an ADSP 21065L EZ > Kit Lite board through its serial ports. i was > wondering if anyone of you could give me a hand on the > parts list i would be needing for this project. I > would be using the same components that make up the > on-board single audio codec. unfortunately, i don't > know the manufacturer's number of the parts in this > board. more specifically the 3.3V to 5V voltage level > converter as well as the 24.5?? MHz clock. The user manual of the 21065 EZLab contains a schematic and a parts list: http://www.analog.com/publications/documentation/VisualDSP/ADSP-21065L-Manual.pd\ f The audio codec is a AD1819A and they use a 74LCX125 for the lines from the codec to the Sharc. -- /* Michael Haertl */ |
Reply by ●October 15, 20012001-10-15
At 01:29 AM 10/14/01 +0000, wrote: >hi guys, just recently heard about this ADSP egroups, >and was kinda hoping if anyone here could help me. i >am currently undertaking a project upon which i would >interface 4 stereo audio codecs to an ADSP 21065L EZ >Kit Lite board through its serial ports. i was >wondering if anyone of you could give me a hand on the >parts list i would be needing for this project. I >would be using the same components that make up the >on-board single audio codec. unfortunately, i don't >know the manufacturer's number of the parts in this >board. more specifically the 3.3V to 5V voltage level >converter as well as the 24.5?? MHz clock. well, >since i am here already, i would also wish that could >you include me in this egroups so i could have updates >as well on other applications for the ADSPs. thanks. > >Jaeson Paras We showed a prototype at the Sharc Conference in Sept of a board that does this application exactly. It has 4 AC-97 codecs and interfaces directly to many of the ADI EZ-Kit Lites including the 21065L. We use an ADI 2186M to communicate with each codec. The DSP on the EZ-Kit communicates directly with Sport0 on the 2186M in a 16bit or 24 bit TDM format. This is much easier than interfacing AC-97 codecs directly. If you are interested, please email us directly. Al Clark Danville Signal Processing, Inc. |