logger function in 2812

Hi,
I'm using a C2812 based motion controller board for my mechatronic application. In this proprietary software I'm using a logger function to capture all the necessary signals for later analysis. But I don't have enough information how this logger function is working.
Since in the present setup the data is captured and displayed using the proprietary software, i cannot monitor multiple boards simultaneously.

Is there any other way in which I can transfer all the logged data from all the multiple 2812 boards.?

PS: I'm using a technosoft MSK2812 development kit Start a New Thread

Hi

RTDX is your option. you can write your own code for data recording.
There is a tutorial in CCStudio Docs.
You can find some examples also.
hope it helps.

cheers,
Vikram

On 10/29/07, a...@lycos.com wrote:
>
> Hi,
> I'm using a C2812 based motion controller board for my mechatronic
> application. In this proprietary software I'm using a logger function to
> capture all the necessary signals for later analysis. But I don't have
> enough information how this logger function is working.
> Since in the present setup the data is captured and displayed using the
> proprietary software, i cannot monitor multiple boards simultaneously.
>
> Is there any other way in which I can transfer all the logged data from
> all the multiple 2812 boards.?
>
> PS: I'm using a technosoft MSK2812 development kit
>
> Start a New Thread