hi all I'm using 5416 dsk and code composer Can anyone send me an example to use mcbsp2 in rsr232 mode at 19200 ??? regards |
|
rsr232
Started by ●April 10, 2003
Reply by ●April 10, 20032003-04-10
Hi, The document SPRA661 from TI explains in depth how to implement UART using McBSP/DMA. In the appendix you can also find assembler source code. --- In , "Rinux" <rinux@i...> wrote: > hi all > I'm using 5416 dsk and code composer > > Can anyone send me an example to use mcbsp2 in rsr232 mode at 19200 ??? > > regards |
Reply by ●April 11, 20032003-04-11
There is a nifty example showing how to make a software UART using the
McBSP in the device driver development kit. If you go to www.dspvillage.com and navigate to: "TI Home > DSP Village Home > Software > Peripheral Drivers > Driver Development Kit" there is a download link for the source code. Thom -----Original Message----- From: Rinux [mailto:] Sent: Thursday, April 10, 2003 2:08 AM To: Subject: [c54x] rsr232 hi all I'm using 5416 dsk and code composer Can anyone send me an example to use mcbsp2 in rsr232 mode at 19200 ??? regards _____________________________________ Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. _____________________________________ About this discussion group: To Join: Send an email to To Post: Send an email to To Leave: Send an email to Archives: http://www.yahoogroups.com/group/c54x Other Groups: http://www.dsprelated.com ">http://docs.yahoo.com/info/terms/ |