|
Dear group I have a C5402 DSK that runs well on the older PCs (Win98 platform) in the lab, but refuses to work with two new 2 GHz Intel machines (Intel motherboard and processor). I have tried all the obvious things (port address, port mode, etc). I have tried the board both with TI parallel emulator and Spectrum Digital XDS510PP and XDS510PP_Plus JTAG emulators. The boards (I have tried 3 different ones) work on older PCs, but not the two new machines. Have anyone had any similar problems. TI support is in the dark re this problem. I have even bought a PCI card with parallel port, but to no avail either. Jean Viljoen Development Engineer Azoteq (Pty) Ltd Tel: +27 21 863 0033 Fax: +27 21 863 1512 |
|
|
Trouble with C5402 DSK on new Intel PCs
Started by ●June 18, 2003
Reply by ●June 18, 20032003-06-18
|
Jean- > I have a C5402 DSK that runs well on the older PCs (Win98 platform) in > the lab, but refuses to work with two new 2 GHz Intel machines (Intel > motherboard and processor). I have tried all the obvious things (port > address, port mode, etc). I have tried the board both with TI parallel > emulator and Spectrum Digital XDS510PP and XDS510PP_Plus JTAG emulators. > The boards (I have tried 3 different ones) work on older PCs, but not > the two new machines. > > Have anyone had any similar problems. TI support is in the dark re this > problem. I have even bought a PCI card with parallel port, but to no > avail either. Have you got another simple parallel port device you can try? A Xilinx or Altera programming pod, or something that basically tests the port? The fact that your LPT2 add-in card won't work is very suspicious -- it needs to be tested with something else first. -Jeff |
Reply by ●June 18, 20032003-06-18
|
Jean, In Win98 any software may access the LPT port directly, but if you are now running NT, 2000 or XP you need to install special LPT drivers for the XDS510PP that (most likely) came with the emulator. Make sure you have the administrator rights to your PC before you try to install them. If you have done that already and it still doesn't work, contact the manufacturer (Spectrum Digital) for help. Jerry Lewandowski Signum Systems Corp. Moorpark, CA 93021 www.signum.com =================================================== Emulators, Compilers, Debuggers, RTOS for: 8051, ARM, OMAP, 186, 166, TriCore, Z8 and TMS320 DSPs =================================================== ----- Original Message ----- From: "Jean Viljoen" <> To: "C54x DSP Discussion Group" <> Sent: Wednesday, June 18, 2003 3:39 AM Subject: [c54x] Trouble with C5402 DSK on new Intel PCs > Dear group > > I have a C5402 DSK that runs well on the older PCs (Win98 platform) in > the lab, but refuses to work with two new 2 GHz Intel machines (Intel > motherboard and processor). I have tried all the obvious things (port > address, port mode, etc). I have tried the board both with TI parallel > emulator and Spectrum Digital XDS510PP and XDS510PP_Plus JTAG emulators. > The boards (I have tried 3 different ones) work on older PCs, but not > the two new machines. > > Have anyone had any similar problems. TI support is in the dark re this > problem. I have even bought a PCI card with parallel port, but to no > avail either. > > Jean Viljoen > Development Engineer > Azoteq (Pty) Ltd > > Tel: +27 21 863 0033 > Fax: +27 21 863 1512 |
