I have an external flash device that I am programming by having my program inside an array of a "programming" program...which can write it out to flash. Problem is that I am running out of ram. ...I can't hold my application program inside my program program much longer. Is there a utility on code composer that would allow me to write the onboard flash? (Similiar to how P&E Micro writes flash on a 68k device?) Thanks, Mike |
|
can code composer program on board flash?
Started by ●November 18, 2004
Reply by ●November 18, 20042004-11-18
hallo, how large is your program that you want tot move to flash? how large is the probram that saves the program to flash derk > -----Oorspronkelijk bericht----- > Van: bsd_mike [mailto:] > Verzonden: donderdag 18 november 2004 14:25 > Aan: > Onderwerp: [c54x] can code composer program on board flash? > I have an external flash device that I am programming by having > my program inside an array of a "programming" program...which > can write it out to flash. > > Problem is that I am running out of ram. ...I can't hold > my application program inside my program program much longer. > > Is there a utility on code composer that would allow me to > write the onboard flash? (Similiar to how P&E Micro writes > flash on a 68k device?) > > Thanks, > Mike > _____________________________________ > Note: If you do a simple "reply" with your email client, only the > author of this message will receive your answer. You need to do > a "reply all" if you want your answer to be distributed to the > entire group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > > To Post: Send an email to > > To Leave: Send an email to > > Archives: http://www.yahoogroups.com/group/c54x > > Other Groups: http://www.dsprelated.com > > Yahoo! Groups Links > > |
Reply by ●November 18, 20042004-11-18
bsd_mike wrote: > > > I have an external flash device that I am programming by having > my program inside an array of a "programming" program...which > can write it out to flash. > > Problem is that I am running out of ram. ...I can't hold > my application program inside my program program much longer. > > Is there a utility on code composer that would allow me to > write the onboard flash? (Similiar to how P&E Micro writes > flash on a 68k device?) > If you are using CCS 2.x (I'm not sure about 1.x) go to tools->Flashburn There is a TI appnote and associated code for customizing the utility to work with your memory map and type of flash. It uses the JTAG and CCS to transfer the file to the target for burning. Brian -- ----------------- Brian C. Lane (W7BCL) Programmer www.shinemicro.com RF, DSP & Microcontroller Design |