Forums

Help Required(Student Of MS)

Started by ehsanqazi2002 February 12, 2007
hello every one
i am using C54CST Chip along with AIC20 Codec i have the follwing
problem if any one can help me

In a multi threaded DSP/BIOS application when i initialize AIC20 the
system crashes/hangs and no further processing is done

PLZ if some one can help me whether it is memory problem or anything
else
Thanks
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

ehsanqazi2002 wrote:
> hello every one
> i am using C54CST Chip along with AIC20 Codec i have the follwing
> problem if any one can help me
>
> In a multi threaded DSP/BIOS application when i initialize AIC20 the
> system crashes/hangs and no further processing is done
>
> PLZ if some one can help me whether it is memory problem or anything
> else
>

Yes, it is probably a memory problem or anything else. :)

I would suggest starting here:

http://www.catb.org/~esr/faqs/smart-questions.html

The group is more than willing to help, as long as you make some effort
to help yourself first.

Brian

- --
- ---[Office 71.4F]--[Outside 41.6F]--[Server 88.9F]--[Coaster 71.9F]---
- ---[ MELISSA ANN (367715000) @ 47 34.2808 -122 29.5895 ]---
Software, Linux, Microcontrollers http://www.brianlane.com
AIS Parser SDK http://www.aisparser.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (GNU/Linux)
Comment: Remember Lexington Green!

iD8DBQFF0IgkIftj/pcSws0RAgScAJ0RHQcHUxqKJ+ivcn+NdOYSJ+BQXwCfZtXd
i/zIMzQSDMe+LuK5DEdcxeM=7QUG
-----END PGP SIGNATURE-----
Ehsan Qazi-

> i am using C54CST Chip along with AIC20 Codec i have the follwing
> problem if any one can help me
>
> In a multi threaded DSP/BIOS application when i initialize AIC20 the
> system crashes/hangs and no further processing is done
>
> PLZ if some one can help me whether it is memory problem or anything
> else

Did you ask Spirit DSP persons? They are responsible for support for the C54CST
product. Here is a good page to start with:

http://www.spiritdsp.com/cst/c54cst.html

http://www.spiritdsp.com/cst/cstfaq_265.html

Suggest to look for anything to do with SDK.

-Jeff