|
Hi, I'm new to TI C5402 DSK. After resetting the parallel port successfully and setting up CCS 1.2 with parallel port for the board, I invoke the CCS application. Sometimes the emulator runs, but other times I get the error saying "can't initialize target DSP" on the same computer. Any quick hint as to what might be wrong? Thanks, Lin |
|
|
Help: C5402 DSK initialization inconsistency
Started by ●March 21, 2002
Reply by ●March 21, 20022002-03-21
|
Try to make sure your dip-switch settings are ok. At 03:59 PM 21/03/2002 +0000, you wrote: >_____________________________________ >Note: If you do a simple "reply" with your email client, only the author >of this message will receive your answer. You need to do a "reply all" if >you want your answer to be distributed to the entire group. > >_____________________________________ >About this discussion group: > >To Join: Send an email to > >To Post: Send an email to > >To Leave: Send an email to > >Archives: http://www.yahoogroups.com/group/c54x > >Other Groups: http://www.dsprelated.com > >There is 1 message in this issue. > >Topics in this digest: > > 1. Help: C5402 DSK initialization inconsistency > From: "commdsp" < >________________________________________________________________________ >________________________________________________________________________ > >Message: 1 > Date: Thu, 21 Mar 2002 00:30:48 -0000 > From: "commdsp" <> >Subject: Help: C5402 DSK initialization inconsistency > >Hi, > >I'm new to TI C5402 DSK. After resetting the parallel port >successfully and setting up CCS 1.2 with parallel port for >the board, I invoke the CCS application. Sometimes the emulator >runs, but other times I get the error saying "can't initialize >target DSP" on the same computer. Any quick hint as to >what might be wrong? > >Thanks, > >Lin > > >________________________________________________________________________ >________________________________________________________________________ > >">http://docs.yahoo.com/info/terms/ |
Reply by ●March 22, 20022002-03-22
|
you might see if JP2 is configured ok.
-----Original Message----- From: Joel Ironstone [mailto:] Sent: Friday, March 22, 2002 3:29 AM To: Subject: Re: [c54x] Help: C5402 DSK initialization inconsistency Try to make sure your dip-switch settings are ok. At 03:59 PM 21/03/2002 +0000, you wrote: >_____________________________________ >Note: If you do a simple "reply" with your email client, only the author >of this message will receive your answer. You need to do a "reply all" if >you want your answer to be distributed to the entire group. > >_____________________________________ >About this discussion group: > >To Join: Send an email to > >To Post: Send an email to > >To Leave: Send an email to > >Archives: http://www.yahoogroups.com/group/c54x > >Other Groups: http://www.dsprelated.com > >There is 1 message in this issue. > >Topics in this digest: > > 1. Help: C5402 DSK initialization inconsistency > From: "commdsp" < >________________________________________________________________________ >________________________________________________________________________ > >Message: 1 > Date: Thu, 21 Mar 2002 00:30:48 -0000 > From: "commdsp" <> >Subject: Help: C5402 DSK initialization inconsistency > >Hi, > >I'm new to TI C5402 DSK. After resetting the parallel port >successfully and setting up CCS 1.2 with parallel port for >the board, I invoke the CCS application. Sometimes the emulator >runs, but other times I get the error saying "can't initialize >target DSP" on the same computer. Any quick hint as to >what might be wrong? > >Thanks, > >Lin > > >________________________________________________________________________ >________________________________________________________________________ > >">http://docs.yahoo.com/info/terms/ _____________________________________ Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. _____________________________________ About this discussion group: To Join: Send an email to To Post: Send an email to To Leave: Send an email to Archives: http://www.yahoogroups.com/group/c54x Other Groups: http://www.dsprelated.com ">http://docs.yahoo.com/info/terms/ |
