Hi, I have a problem with build options in CCS 2.21 for the C5510 I want set the built option "Processor Version" with more than one entries such "-v5510:2.0 -v5510:2.1 -v5510:2.2". It seems that the entry field allows only one value. I have tried many string combinations already. Any suggestions? Thanks, Milan |
|
Processor Versions
Started by ●September 27, 2004
Reply by ●September 28, 20042004-09-28
Milan, I am using an external MAKEFILE for projects so that I eliminate these kinds of problems. I suggest to use an external make file. Regards, Ismail ----- Original Message ----- From: "Milan Bajza" <> To: <> Sent: Monday, September 27, 2004 9:53 PM Subject: [c55x] Processor Versions > > Hi, > > I have a problem with build options in CCS 2.21 for the C5510 > > I want set the built option "Processor Version" with more than > one entries such "-v5510:2.0 -v5510:2.1 -v5510:2.2". > It seems that the entry field allows only one value. I have > tried many string combinations already. > Any suggestions? > > Thanks, > Milan > > _____________________________________ > Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > > To Post: Send an email to > > To Leave: Send an email to > > Archives: http://www.yahoogroups.com/group/c55x > > Other Groups: http://www.dsprelated.com > > Yahoo! Groups Links > > |
Reply by ●September 28, 20042004-09-28
Hi Milan, As far as I know, you can't supply multiple processor versions in CCS. May I know why do you need this option? Regards, Mihir Mody, Multimedia codecs group, Texas Instruments India, Ltd, Email : Phone : +91-80-25099307 -----Original Message----- From: Milan Bajza [mailto:] Sent: Tuesday, September 28, 2004 12:24 AM To: Subject: [c55x] Processor Versions Hi, I have a problem with build options in CCS 2.21 for the C5510 I want set the built option "Processor Version" with more than one entries such "-v5510:2.0 -v5510:2.1 -v5510:2.2". It seems that the entry field allows only one value. I have tried many string combinations already. Any suggestions? Thanks, Milan _____________________________________ Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. _____________________________________ About this discussion group: To Join: Send an email to To Post: Send an email to To Leave: Send an email to Archives: http://www.yahoogroups.com/group/c55x Other Groups: http://www.dsprelated.com Yahoo! Groups Links |
|
Reply by ●September 28, 20042004-09-28
Hi Mihir, I want build a library of a TETRA-Vocoder algorithm written in assembler, ported from C54x. This library runs on C5510 with revisions 2.0, 2.1 or 2.2 at this time. I want ensure the best code generation with consideration of silicon bugs. Do you think this is not necessary? Can I build the library for e.g. only revision 2.0 with sureness running on revision e.g. 3.0 later? I think each new revision could have new silicon bugs. Ismail suggest to use an external make file. Regards, Milan Ingenieurbo Bajza Softwareentwicklung f DSPs und Mikrocontroller -----Original Message----- From: Mody, Mihir [mailto:] Sent: Tuesday, September 28, 2004 3:22 PM To: Milan Bajza; Subject: RE: [c55x] Processor Versions Hi Milan, As far as I know, you can't supply multiple processor versions in CCS. May I know why do you need this option? Regards, Mihir Mody, Multimedia codecs group, Texas Instruments India, Ltd, Email : Phone : +91-80-25099307 -----Original Message----- From: Milan Bajza [mailto:] Sent: Tuesday, September 28, 2004 12:24 AM To: Subject: [c55x] Processor Versions Hi, I have a problem with build options in CCS 2.21 for the C5510 I want set the built option "Processor Version" with more than one entries such "-v5510:2.0 -v5510:2.1 -v5510:2.2". It seems that the entry field allows only one value. I have tried many string combinations already. Any suggestions? Thanks, Milan _____________________________________ Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. _____________________________________ About this discussion group: To Join: Send an email to To Post: Send an email to To Leave: Send an email to Archives: http://www.yahoogroups.com/group/c55x Other Groups: http://www.dsprelated.com Yahoo! Groups Links |