Perry, We have verified that what you have found is correct, this is a bug in the CSL. We'll put this in our next release of CSL. We further apologize for any inconvenience this bug has caused. Thank you for bringing it to our attention. REGARDS, DSP Hotline If you need further assistance, you may contact us at: EMAIL: s...@ti.com Online Assistance: www.dspvillage.com Phone: 972-644-5580 ------------------ Note: In the event that information received from the TI TMS320 DSP Technical Support Hotline conflicts with TI supplied or originated written documentation, that information from TI supplied or originated written documentation should be used. -----Original Message----- To: s...@ti.com Date: Wed, 30 Jan 2002 09:15:44 -0600 From: p...@telex.com Subject: SYSR address /******************************************************************************\ * _C HIP_SYSR - System Control Register * * Fields: * (RW) _CHIP_SYSR_HPE * (RW) _CHIP_SYSR_BH * (RW) _CHIP_SYSR_HBH * (R) _CHIP_SYSR_BOOTM3 * (RW) _CHIP_SYSR_CLKDIV * \******************************************************************************/ #define _CHIP_SYSR_ADDR (0x03FDu) #define _CHIP_SYSR REG16(_CHIP_SYSR_ADDR) #define _SYSR _SYSR The define address is ?????? correct, incorrect? I'm writing to 0x07FD and it works, please note this issue. Perry Howell Lead Design Engineer Vega Signaling Products Telex Communications, Inc 8601 East Cornhusker Hiway Lincoln NE, 68507-9702 402-465-6621 402-467-4003(fax) |
35184784-Re: SYSR address {ID:4791636}
Started by ●January 31, 2002