|
Hello, I've been trying to use the MDG601-VD DECT module from Inventel (www.inventel.com) daughtercard with the 6711DSK, but have bumped into a problem here. Maybe you folks could provide me with an insight. I'm trying to receive/transmit data from/to the MDG601-VD daughter card via McBSP1 by using the IOM-2 interface with the transmission/reception triggered by an external interrupt,coming from the daughtercard. I've tried the code in the Application Report SPRA569A - August 2001 (by Eric Biscondi Scott Chen, posted on the TI site). I will be pleased if you could help me in connecting the MDG601 DECT module with the dsk6711. How can I connect the peripheral and the memory connector with the connector of the MDG601 daughtercard? Thank you in advance for your help, |
|
|
Help DSK6711 connectors
Started by ●September 7, 2002
Reply by ●September 9, 20022002-09-09
|
Hello : You wrote : > I'm trying to receive/transmit data from/to the > MDG601-VD daughter card via McBSP1 by using the IOM-2 As far as I can see the IOM-2 offers a ISDN type of interface which is synchronous and the Inventel module requires an RS232 Asynchonous serial link. Could this be you problem ? If this is your problem, I know that you could find a DSK daugther card with RS232 interface (UART such as 16550). I have no reference here but this should be easy to find. Hope this help. Jean-Michel MERCIER ------------------- dsp & imaging - www.ateme.com ATEME - 26 Burospace - 91573 BIEVRES Tel : +33 (0)1 69 35 89 73 (direct) Fax : +33 (0)1 60 19 13 95 |
