config_AIC23

hi all,
i want the configuration of the AIC23 (i mean the configuration of the 9 registers of C6713"volume headphone,analog path ........."),because i need to do the acquisition of voice signal to use it in the encryption of voice signal.
thanks all.
____________________________________________________________________________________ Start a New Thread

DSK6713_AIC23_CodecHandle hCodec;
DSK6713_AIC23_Config config={
0x001c,
0x001c,
0x00d8,
0x00d8,
0x0015,
0x0001,
0x0000,
0x0043,
0x000d,
0x0001
};

ASIFBAGWAN

----- Original Message ----
From: nadism Youcef
To: c...
Sent: Wednesday, April 16, 2008 6:41:55 AM
Subject: [c6x] config_AIC23

hi all,
i want the configuration of the AIC23 (i mean the configuration of the 9 registers of C6713"volume headphone,analog path ........."), because i need to do the acquisition of voice signal to use it in the encryption of voice signal.
thanks all. Start a New Thread

hi asif
i am also trying to do the same i did the setting that u told ie to
set registeres as u told i am using mic in as an active input but its not
accepting it still when i connect an input to line in pin its considering
that input pls telll me the setting to use mic in as an input

thanks for your responce

by take care

good night

On 4/17/08, asif bagwan wrote:
>
> DSK6713_AIC23_CodecHandle hCodec;
> DSK6713_AIC23_Config config={
> 0x001c,
> 0x001c,
> 0x00d8,
> 0x00d8,
> 0x0015,
> 0x0001,
> 0x0000,
> 0x0043,
> 0x000d,
> 0x0001
> };
>
> ASIFBAGWAN
>
> ----- Original Message ----
> From: nadism Youcef
> To: c...
> Sent: Wednesday, April 16, 2008 6:41:55 AM
> Subject: [c6x] config_AIC23
>
> hi all,
> i want the configuration of the AIC23 (i mean the configuration of the 9
> registers of C6713"volume headphone,analog path ........."), because i need
> to do the acquisition of voice signal to use it in the encryption of voice
> signal.
> thanks all.
>
> ------------------------------
> >
> ------------------------------
> Start a New Thread