Has anyone been sucessful installing the drivers for this Daughtercard.
I have a DSK 6416 board. The User Guide for the card has two sets of
instructions for software installation, both of which are not very
helpful.
Any advice would be appreciated. Just point me in the right direction.
Thanks.
USB 2.0 Daughtercard
Started by ●June 11, 2008
Reply by ●June 12, 20082008-06-12
Charley,
On Wed, Jun 11, 2008 at 7:00 PM, Abboud,Charley wrote:
> Has anyone been sucessful installing the drivers for this Daughtercard.
To what product does "this Daughtercard" refer??
mikedunn
> I have a DSK 6416 board. The User Guide for the card has two sets of
> instructions for software installation, both of which are not very
> helpful.
>
> Any advice would be appreciated. Just point me in the right direction.
>
> Thanks.
--
www.dsprelated.com/blogs-1/nf/Mike_Dunn.php
On Wed, Jun 11, 2008 at 7:00 PM, Abboud,Charley wrote:
> Has anyone been sucessful installing the drivers for this Daughtercard.
To what product does "this Daughtercard" refer??
mikedunn
> I have a DSK 6416 board. The User Guide for the card has two sets of
> instructions for software installation, both of which are not very
> helpful.
>
> Any advice would be appreciated. Just point me in the right direction.
>
> Thanks.
--
www.dsprelated.com/blogs-1/nf/Mike_Dunn.php
Reply by ●June 12, 20082008-06-12
Charley,
There have been previous posts on this group concerning the AvNet
'Texas Instruments DSK to USB 2.0 Daughtercard'.
Please check the archives.
Are you having problems installing DSK code or Host code??
Please include the group on all posts. There is likely to be someone
lurking out there who has the Avnet board.
mikedunn
On Thu, Jun 12, 2008 at 11:02 AM, Abboud,Charley wrote:
> Texas Instruments DSK to USB 2.0 Daughtercard
> Located here: http://www.em.avnet.com/evk/home/0,1719,RID%253D7554%
> 2526CID%253D13035%2526CCD%253DUSA%2526SID%253D7546%2526DID%253DADA%
> 2526SRT%253D1%2526LID%253D7553%2526PRT%253D0%2526PVW%253D%2526PNT%
> 253D%2526BID%253DDF2%2526CTP%253DEVK,00.html
>
> --- In c..., "Michael Dunn" wrote:
>>
>> Charley,
>>
>> On Wed, Jun 11, 2008 at 7:00 PM, Abboud,Charley
> wrote:
>> > Has anyone been sucessful installing the drivers for this
> Daughtercard.
>>
>> To what product does "this Daughtercard" refer??
>>
>> mikedunn
>> > I have a DSK 6416 board. The User Guide for the card has two sets
> of
>> > instructions for software installation, both of which are not very
>> > helpful.
>> >
>> > Any advice would be appreciated. Just point me in the right
> direction.
>> >
>> > Thanks.
>> >
>> >
>>
>> --
>> www.dsprelated.com/blogs-1/nf/Mike_Dunn.php
>
--
www.dsprelated.com/blogs-1/nf/Mike_Dunn.php
There have been previous posts on this group concerning the AvNet
'Texas Instruments DSK to USB 2.0 Daughtercard'.
Please check the archives.
Are you having problems installing DSK code or Host code??
Please include the group on all posts. There is likely to be someone
lurking out there who has the Avnet board.
mikedunn
On Thu, Jun 12, 2008 at 11:02 AM, Abboud,Charley wrote:
> Texas Instruments DSK to USB 2.0 Daughtercard
> Located here: http://www.em.avnet.com/evk/home/0,1719,RID%253D7554%
> 2526CID%253D13035%2526CCD%253DUSA%2526SID%253D7546%2526DID%253DADA%
> 2526SRT%253D1%2526LID%253D7553%2526PRT%253D0%2526PVW%253D%2526PNT%
> 253D%2526BID%253DDF2%2526CTP%253DEVK,00.html
>
> --- In c..., "Michael Dunn" wrote:
>>
>> Charley,
>>
>> On Wed, Jun 11, 2008 at 7:00 PM, Abboud,Charley
> wrote:
>> > Has anyone been sucessful installing the drivers for this
> Daughtercard.
>>
>> To what product does "this Daughtercard" refer??
>>
>> mikedunn
>> > I have a DSK 6416 board. The User Guide for the card has two sets
> of
>> > instructions for software installation, both of which are not very
>> > helpful.
>> >
>> > Any advice would be appreciated. Just point me in the right
> direction.
>> >
>> > Thanks.
>> >
>> >
>>
>> --
>> www.dsprelated.com/blogs-1/nf/Mike_Dunn.php
>
--
www.dsprelated.com/blogs-1/nf/Mike_Dunn.php
Reply by ●June 12, 20082008-06-12
I believe I installed the provided DSK code through code composer.
Now I am trying to find some way to install the EZUSB.SYS device
driver on the host. They do provide an executable (EZ-
USB_devtools_version_261700.exe), which I believe automates the
process of installing all the required device drivers; however it did
not seem to do anything when I ran it. The instructions provided in
the User Guide do not correlate at all to what I am seeing on the
screen.
--- In c..., "Michael Dunn" wrote:
>
> Charley,
>
> There have been previous posts on this group concerning the AvNet
> 'Texas Instruments DSK to USB 2.0 Daughtercard'.
> Please check the archives.
>
> Are you having problems installing DSK code or Host code??
>
> Please include the group on all posts. There is likely to be
someone
> lurking out there who has the Avnet board.
>
> mikedunn
Now I am trying to find some way to install the EZUSB.SYS device
driver on the host. They do provide an executable (EZ-
USB_devtools_version_261700.exe), which I believe automates the
process of installing all the required device drivers; however it did
not seem to do anything when I ran it. The instructions provided in
the User Guide do not correlate at all to what I am seeing on the
screen.
--- In c..., "Michael Dunn" wrote:
>
> Charley,
>
> There have been previous posts on this group concerning the AvNet
> 'Texas Instruments DSK to USB 2.0 Daughtercard'.
> Please check the archives.
>
> Are you having problems installing DSK code or Host code??
>
> Please include the group on all posts. There is likely to be
someone
> lurking out there who has the Avnet board.
>
> mikedunn
Reply by ●June 12, 20082008-06-12
Charley,
On Thu, Jun 12, 2008 at 1:51 PM, Abboud,Charley wrote:
> I believe I installed the provided DSK code through code composer.
>
> Now I am trying to find some way to install the EZUSB.SYS device
> driver on the host. They do provide an executable (EZ-
> USB_devtools_version_261700.exe), which I believe automates the
> process of installing all the required device drivers; however it did
> not seem to do anything when I ran it. The instructions provided in
> the User Guide do not correlate at all to what I am seeing on the
> screen.
NOTE: Just to be clear, I have never used these tools.
I would expect ezusb.sys to land in c:\windows\system32\drivers.
Check there for it. if you don't see it, search the windows directory
for it.
The driver is from Cypress. You may want to check their website [you
may need the part number off of the USB chip on the daughtercard] for
some possibly more current info or an app note that might help.
mikedunn
>
> --- In c..., "Michael Dunn" wrote:
>>
>> Charley,
>>
>> There have been previous posts on this group concerning the AvNet
>> 'Texas Instruments DSK to USB 2.0 Daughtercard'.
>> Please check the archives.
>>
>> Are you having problems installing DSK code or Host code??
>>
>> Please include the group on all posts. There is likely to be
> someone
>> lurking out there who has the Avnet board.
>>
>> mikedunn
--
www.dsprelated.com/blogs-1/nf/Mike_Dunn.php
On Thu, Jun 12, 2008 at 1:51 PM, Abboud,Charley wrote:
> I believe I installed the provided DSK code through code composer.
>
> Now I am trying to find some way to install the EZUSB.SYS device
> driver on the host. They do provide an executable (EZ-
> USB_devtools_version_261700.exe), which I believe automates the
> process of installing all the required device drivers; however it did
> not seem to do anything when I ran it. The instructions provided in
> the User Guide do not correlate at all to what I am seeing on the
> screen.
NOTE: Just to be clear, I have never used these tools.
I would expect ezusb.sys to land in c:\windows\system32\drivers.
Check there for it. if you don't see it, search the windows directory
for it.
The driver is from Cypress. You may want to check their website [you
may need the part number off of the USB chip on the daughtercard] for
some possibly more current info or an app note that might help.
mikedunn
>
> --- In c..., "Michael Dunn" wrote:
>>
>> Charley,
>>
>> There have been previous posts on this group concerning the AvNet
>> 'Texas Instruments DSK to USB 2.0 Daughtercard'.
>> Please check the archives.
>>
>> Are you having problems installing DSK code or Host code??
>>
>> Please include the group on all posts. There is likely to be
> someone
>> lurking out there who has the Avnet board.
>>
>> mikedunn
--
www.dsprelated.com/blogs-1/nf/Mike_Dunn.php
Reply by ●June 12, 20082008-06-12
Charley-
> I believe I installed the provided DSK code through code composer.
>
> Now I am trying to find some way to install the EZUSB.SYS device
> driver on the host. They do provide an executable (EZ-
> USB_devtools_version_261700.exe), which I believe automates the
> process of installing all the required device drivers; however it did
> not seem to do anything when I ran it. The instructions provided in
> the User Guide do not correlate at all to what I am seeing on the
> screen.
Which USB daughtercard are you using? Avnet, as Mike suggested? Another one?
Please be specific.
Which DSK board? The driver and test program situation is different for different
DSK boards.
-Jeff
> --- In c..., "Michael Dunn" wrote:
> >
> > Charley,
> >
> > There have been previous posts on this group concerning the AvNet
> > 'Texas Instruments DSK to USB 2.0 Daughtercard'.
> > Please check the archives.
> >
> > Are you having problems installing DSK code or Host code??
> >
> > Please include the group on all posts. There is likely to be
> someone
> > lurking out there who has the Avnet board.
> >
> > mikedunn
> I believe I installed the provided DSK code through code composer.
>
> Now I am trying to find some way to install the EZUSB.SYS device
> driver on the host. They do provide an executable (EZ-
> USB_devtools_version_261700.exe), which I believe automates the
> process of installing all the required device drivers; however it did
> not seem to do anything when I ran it. The instructions provided in
> the User Guide do not correlate at all to what I am seeing on the
> screen.
Which USB daughtercard are you using? Avnet, as Mike suggested? Another one?
Please be specific.
Which DSK board? The driver and test program situation is different for different
DSK boards.
-Jeff
> --- In c..., "Michael Dunn" wrote:
> >
> > Charley,
> >
> > There have been previous posts on this group concerning the AvNet
> > 'Texas Instruments DSK to USB 2.0 Daughtercard'.
> > Please check the archives.
> >
> > Are you having problems installing DSK code or Host code??
> >
> > Please include the group on all posts. There is likely to be
> someone
> > lurking out there who has the Avnet board.
> >
> > mikedunn
Reply by ●June 12, 20082008-06-12
Sorry, i was replying to one person instead of the whole group.
Texas Instruments DSK to USB 2.0 Daughtercard. The one with the
CY7C68001 USB controller.
You can find it here:
http://www.em.avnet.com/evk/home/0,1719,RID%253D7554%2526CID%
253D13035%2526CCD%253DUSA%2526SID%253D7546%2526DID%253DADA%2526SRT%
253D1%2526LID%253D7553%2526PRT%253D0%2526PVW%253D%2526PNT%253D%
2526BID%253DDF2%2526CTP%253DEVK,00.html
The board is the Spectrum Digital TMS320C6416T DSK.
I loaded the target DSK with the embedded code provided. I have the
GUI USB utility that they provided, but I was unable to load the
drivers, so the card is not recognized.
Apparently, the driver file is called EZUSB.SYS, and the executable
(EZ-USB_devtools_version_261700.exe) was supposed to install the
driver/s.
Sorry, I'm new at this.
--- In c..., Jeff Brower wrote:
> Which USB daughtercard are you using? Avnet, as Mike suggested?
Another one?
> Please be specific.
>
> Which DSK board? The driver and test program situation is
different for different
> DSK boards.
>
> -Jeff
>
Texas Instruments DSK to USB 2.0 Daughtercard. The one with the
CY7C68001 USB controller.
You can find it here:
http://www.em.avnet.com/evk/home/0,1719,RID%253D7554%2526CID%
253D13035%2526CCD%253DUSA%2526SID%253D7546%2526DID%253DADA%2526SRT%
253D1%2526LID%253D7553%2526PRT%253D0%2526PVW%253D%2526PNT%253D%
2526BID%253DDF2%2526CTP%253DEVK,00.html
The board is the Spectrum Digital TMS320C6416T DSK.
I loaded the target DSK with the embedded code provided. I have the
GUI USB utility that they provided, but I was unable to load the
drivers, so the card is not recognized.
Apparently, the driver file is called EZUSB.SYS, and the executable
(EZ-USB_devtools_version_261700.exe) was supposed to install the
driver/s.
Sorry, I'm new at this.
--- In c..., Jeff Brower wrote:
> Which USB daughtercard are you using? Avnet, as Mike suggested?
Another one?
> Please be specific.
>
> Which DSK board? The driver and test program situation is
different for different
> DSK boards.
>
> -Jeff
>
Reply by ●June 13, 20082008-06-13
Charley-
> Sorry, i was replying to one person instead of the whole group.
>
> Texas Instruments DSK to USB 2.0 Daughtercard. The one with the
> CY7C68001 USB controller.
>
> You can find it here:
> http://www.em.avnet.com/evk/home/0,1719,RID%253D7554%2526CID%
> 253D13035%2526CCD%253DUSA%2526SID%253D7546%2526DID%253DADA%2526SRT%
> 253D1%2526LID%253D7553%2526PRT%253D0%2526PVW%253D%2526PNT%253D%
> 2526BID%253DDF2%2526CTP%253DEVK,00.html
Ok, that's an Avnet card, designed and manufactured by Avnet. You need to ask Avnet
for their docs and CCS example projects and test programs that describe and
demonstrate using the card with the DSK 6416 board. There should be an Avnet FAE who
will support you.
> The board is the Spectrum Digital TMS320C6416T DSK.
>
> I loaded the target DSK with the embedded code provided. I have the
> GUI USB utility that they provided, but I was unable to load the
> drivers, so the card is not recognized.
Ok... some confusion here. What does the Spectrum Digital (SD) "GUI USB" utility
have to do with the Avnet daughtercard? The SD utility will use the built-in USB
port on the DSK, not the USB connection on the daughtercard. These are two different
(way different!) things. SD can't help you with the Avnet daughtercard (or at least
I don't think they can).
> Apparently, the driver file is called EZUSB.SYS, and the executable
> (EZ-USB_devtools_version_261700.exe) was supposed to install the
> driver/s.
Again, Avnet FAE is the person to ask. My company has used the Avnet card before
with DSK 5510, but not with DSK 6416, otherwise I could be more helpful. Maybe other
group members have some specific experience with that combination.
-Jeff
> --- In c..., Jeff Brower wrote:
> > Which USB daughtercard are you using? Avnet, as Mike suggested?
> Another one?
> > Please be specific.
> >
> > Which DSK board? The driver and test program situation is
> different for different
> > DSK boards.
> >
> > -Jeff
> Sorry, i was replying to one person instead of the whole group.
>
> Texas Instruments DSK to USB 2.0 Daughtercard. The one with the
> CY7C68001 USB controller.
>
> You can find it here:
> http://www.em.avnet.com/evk/home/0,1719,RID%253D7554%2526CID%
> 253D13035%2526CCD%253DUSA%2526SID%253D7546%2526DID%253DADA%2526SRT%
> 253D1%2526LID%253D7553%2526PRT%253D0%2526PVW%253D%2526PNT%253D%
> 2526BID%253DDF2%2526CTP%253DEVK,00.html
Ok, that's an Avnet card, designed and manufactured by Avnet. You need to ask Avnet
for their docs and CCS example projects and test programs that describe and
demonstrate using the card with the DSK 6416 board. There should be an Avnet FAE who
will support you.
> The board is the Spectrum Digital TMS320C6416T DSK.
>
> I loaded the target DSK with the embedded code provided. I have the
> GUI USB utility that they provided, but I was unable to load the
> drivers, so the card is not recognized.
Ok... some confusion here. What does the Spectrum Digital (SD) "GUI USB" utility
have to do with the Avnet daughtercard? The SD utility will use the built-in USB
port on the DSK, not the USB connection on the daughtercard. These are two different
(way different!) things. SD can't help you with the Avnet daughtercard (or at least
I don't think they can).
> Apparently, the driver file is called EZUSB.SYS, and the executable
> (EZ-USB_devtools_version_261700.exe) was supposed to install the
> driver/s.
Again, Avnet FAE is the person to ask. My company has used the Avnet card before
with DSK 5510, but not with DSK 6416, otherwise I could be more helpful. Maybe other
group members have some specific experience with that combination.
-Jeff
> --- In c..., Jeff Brower wrote:
> > Which USB daughtercard are you using? Avnet, as Mike suggested?
> Another one?
> > Please be specific.
> >
> > Which DSK board? The driver and test program situation is
> different for different
> > DSK boards.
> >
> > -Jeff
Reply by ●June 16, 20082008-06-16
Has anyone out there successfully installed the device drivers for this
card? I really just need help with this part.
card? I really just need help with this part.
Reply by ●June 16, 20082008-06-16
Charley-
> You're correct. The USB Utility is from Avnet. It's just a demo
> program to show proper functioning of the USB card.
Ok.
> Has anyone out there successfully installed the device drivers for
> this card? I really just need help with this part.
You posted this to me, not to the group. As I noted below, my company has used the
Avnet card before with DSK 5510, but not with DSK 6416. Maybe other group members
have some specific experience with that combination. Suggest that you post to the
group.
-Jeff
> --- In c..., Jeff Brower wrote:
> > Ok... some confusion here. What does the Spectrum Digital
> (SD) "GUI USB" utility
> > have to do with the Avnet daughtercard? The SD utility will use
> the built-in USB
> > port on the DSK, not the USB connection on the daughtercard. These
> are two different
> > (way different!) things. SD can't help you with the Avnet
> daughtercard (or at least
> > I don't think they can).
> >
> > > Apparently, the driver file is called EZUSB.SYS, and the
> executable
> > > (EZ-USB_devtools_version_261700.exe) was supposed to install the
> > > driver/s.
> >
> > Again, Avnet FAE is the person to ask. My company has used the
> Avnet card before
> > with DSK 5510, but not with DSK 6416, otherwise I could be more
> helpful. Maybe other
> > group members have some specific experience with that combination.
> >
> > -Jeff
> You're correct. The USB Utility is from Avnet. It's just a demo
> program to show proper functioning of the USB card.
Ok.
> Has anyone out there successfully installed the device drivers for
> this card? I really just need help with this part.
You posted this to me, not to the group. As I noted below, my company has used the
Avnet card before with DSK 5510, but not with DSK 6416. Maybe other group members
have some specific experience with that combination. Suggest that you post to the
group.
-Jeff
> --- In c..., Jeff Brower wrote:
> > Ok... some confusion here. What does the Spectrum Digital
> (SD) "GUI USB" utility
> > have to do with the Avnet daughtercard? The SD utility will use
> the built-in USB
> > port on the DSK, not the USB connection on the daughtercard. These
> are two different
> > (way different!) things. SD can't help you with the Avnet
> daughtercard (or at least
> > I don't think they can).
> >
> > > Apparently, the driver file is called EZUSB.SYS, and the
> executable
> > > (EZ-USB_devtools_version_261700.exe) was supposed to install the
> > > driver/s.
> >
> > Again, Avnet FAE is the person to ask. My company has used the
> Avnet card before
> > with DSK 5510, but not with DSK 6416, otherwise I could be more
> helpful. Maybe other
> > group members have some specific experience with that combination.
> >
> > -Jeff
