hsrtdx

i have my own specific board with dsp ti c6713
if i connect to my board with blackhawk lan560 jtag emulator i can
send data from dsp to host using rtdx and using high speed rtdx

if i replace the modem in xds560r i can only use rtdx the hsrtdx
stucks
at
at postcfg.s62 in the line :
-------------------------
HWI_Obj 1, HWI_RESERVED1, 3, _function, _monitor, _addr,
_dataType, _operation, _client, _iUseDispatcher, _iArg, _IntrMask,
_iCCBitMask
-----------------------------
i dont understand why the following configurations are
:
(not work with hsrtdx_
c6713 dsk via sdxd560r usb emulator
dsp_c671x

(work for the second modem)
blackhawk usb560m -c6713 dsk emulator
tms320c6710

------------------
in the case not works i tried to reduce the clock it not works
also i cant find configuration for xds560r with tms320c6710
----------------

second problem i have is that my project works on rtdx but when i add
it to my friend project i have collosin in memory
in the *.cmd file
in the sections:
-----------
SECTIONS
MEMORY
----------
i suppose somthing in memory not good but i need help about this Start a New Thread

danisade,

On 6/18/08, danisade wrote:
>
> i have my own specific board with dsp ti c6713
> if i connect to my board with blackhawk lan560 jtag emulator i can
> send data from dsp to host using rtdx and using high speed rtdx
>
> if i replace the modem in xds560r i can only use rtdx the hsrtdx
>

You have failed to 'paint a clear picture' of your configuration.
To what 'modem' in xds560r are you referring??
stucks
> at
> at postcfg.s62 in the line :
> -------------------------
> HWI_Obj 1, HWI_RESERVED1, 3, _function, _monitor, _addr,
> _dataType, _operation, _client, _iUseDispatcher, _iArg, _IntrMask,
> _iCCBitMask
> -----------------------------
> i dont understand why the following configurations are
> :
> (not work with hsrtdx_
> c6713 dsk via sdxd560r usb emulator
> dsp_c671x
>
> (work for the second modem)
> blackhawk usb560m -c6713 dsk emulator
> tms320c6710
>

Are there two emulators in one PC?? Or are there 2 PCs??

------------------
> in the case not works i tried to reduce the clock it not works
> also i cant find configuration for xds560r with tms320c6710
> ----------------
>
> second problem i have is that my project works on rtdx but when i add
> it to my friend project i have collosin in memory
> in the *.cmd file
> in the sections:
> -----------
> SECTIONS
> MEMORY
> ----------
> i suppose somthing in memory not good but i need help about this
>

Compare the '.cmd' files of the two working projects to see if you can find
the problem.

mikedunn

>

--
www.dsprelated.com/blogs-1/nf/Mike_Dunn.php Start a New Thread