Forums

Re: Help TMS320C6713 DSK

Started by griz...@yahoo.co.uk June 26, 2008
Hi Claudio

Thanks for posting this qs because I have just met the same prob with the C6414.
I was wondering if you have found the drivers by getting the specific C6713 CC studio CDs that Matt has told you?

Thanks
Ivan
> Hi everybody,
>I'm new in this group and I need some help...
>I have no experience in programming dsp but now I have to do it for my
>thesis and I have a problem.
>
>I have a TMS320C6713 DSK board from Spectrum Digital that can be
>connected to the pc using USB port.
>I read the Quick Start Installation Guide and I followed the
>instruction but I couldn't be able to connect the board to the pc.
>
>Actually I found on the kit only 2 cds:
>1. Matlab and Simulink for use with TI DSPs (free 30-day Trial)
>2. TI Product Information - eXpressDSP - Software and Development Tools
>I read on the Quick Start Installation Guide that there must be also
>the C6713 DSK CodeComposerStudio CDROM, but I didn't find it.
>Luckily I found a CodeComposerStudio v3.0 at my university department
>and I installed it.
>Everything seemed to go well but when I connect the USB cable into the
>DSK board, the pc didn't find the driver on the CCS v3.0 CDROM.
>So the pc canot recognize the DSK board. I read that the driver files
>are "sdusbemu.inf" and sdusbemu.sys" but I didn't find them on the CDROM.
>
>Anybody had this problem? Can you suggest me how to fix it or where to
>find the driver's file?
>
>Thank you for your help
>Claudio
>
>
>
>
>
>
>
>
Ivan,

DSKs should ship with a special DSK version of CCS. As far as I know, the
only place to get the CD is from the manufacturer.
http://www.spectrumdigital.com/

If you purchased a new DSK, contact the distributor/authorized reseller.
If you purchased it used, you might try contacting SD if you have the
original box [with the part number label].

mikedunn
On 6/26/08, g...@yahoo.co.uk wrote:
>
> Hi Claudio
>
> Thanks for posting this qs because I have just met the same prob with the
> C6414.
> I was wondering if you have found the drivers by getting the specific C6713
> CC studio CDs that Matt has told you?
>
> Thanks
> Ivan
>
> > Hi everybody,
> >I'm new in this group and I need some help...
> >I have no experience in programming dsp but now I have to do it for my
> >thesis and I have a problem.
> >
> >I have a TMS320C6713 DSK board from Spectrum Digital that can be
> >connected to the pc using USB port.
> >I read the Quick Start Installation Guide and I followed the
> >instruction but I couldn't be able to connect the board to the pc.
> >
> >Actually I found on the kit only 2 cds:
> >1. Matlab and Simulink for use with TI DSPs (free 30-day Trial)
> >2. TI Product Information - eXpressDSP - Software and Development Tools
> >I read on the Quick Start Installation Guide that there must be also
> >the C6713 DSK CodeComposerStudio CDROM, but I didn't find it.
> >Luckily I found a CodeComposerStudio v3.0 at my university department
> >and I installed it.
> >Everything seemed to go well but when I connect the USB cable into the
> >DSK board, the pc didn't find the driver on the CCS v3.0 CDROM.
> >So the pc canot recognize the DSK board. I read that the driver files
> >are "sdusbemu.inf" and sdusbemu.sys" but I didn't find them on the CDROM.
> >
> >Anybody had this problem? Can you suggest me how to fix it or where to
> >find the driver's file?
> >
> >Thank you for your help
> >Claudio
> >
> >
> >
> >
> >
> >
> >
> >

--
www.dsprelated.com/blogs-1/nf/Mike_Dunn.php