I am trying to specify through the -f option on the linker for it to fill|
all holes in the output image with FF.
I get the following warning:
TMS320C6x COFF Linker Version 4.20
Copyright (c) 1996-2001 Texas Instruments Incorporated
>> warning: -c requires fill value of 0 in .cinit (0000ffff overridden)
>> warning: -c requires fill value of 0 in .pinit (0000ffff overridden)
0 Errors, 2 Warnings, 0 Remarks.
I am unsure if this is OK or not. Does it mean that it ignored my fill with
FF or only that for cinit/pinit it filled with 0 instead?