Hi everybody, We made a board with a 6211 dsp. To debug it we use the XDS510PP emulator via JTAG. As a testbed, we used a 6711 dsk. To program the rom on the dsk, ti provides a flash programming utility which downloads the hex file to the rom. Unfortunately it works only with the dsk...so now how could I download my hex file to the rom on our board? Is there any utility like the one that comes with the dsk? Do I have to write my own utility? If this is the case, how should I proceed? I had a look at the code coming with the dsk, and that contains some call to dsk_hpi_xxx functions. Are there functions like those that work with generic c6211 boards? TIA Federica Legger |
|
download boot code to rom
Started by ●November 11, 2002
Reply by ●November 12, 20022002-11-12
You need to write "boot code" yourself. First you should convert
.out file or .hex file into "binary stream", i.e. the thing you can see in "disassembly window" of your ccs. Then you should write a new .cmd file that map your code into the flash space. Last you can use these data to program your flash or eeprom. You can reference "spra568.pdf" for program flash. Wang Tao ----- Original Message ----- From: "fedelegger" <> Date: Mon, 11 Nov 2002 13:57:27 -0000 To: Subject: [c6x] download boot code to rom Re: Hi everybody, Re: We made a board with a 6211 dsp. To debug it we use the XDS510PP Re: emulator via JTAG. As a testbed, we used a 6711 dsk. Re: To program the rom on the dsk, ti provides a flash programming Re: utility which downloads the hex file to the rom. Unfortunately it Re: works only with the dsk...so now how could I download my hex file to Re: the rom on our board? Is there any utility like the one that comes Re: with the dsk? Do I have to write my own utility? If this is the case, Re: how should I proceed? I had a look at the code coming with the dsk, Re: and that contains some call to dsk_hpi_xxx functions. Are there Re: functions like those that work with generic c6211 boards? Re: TIA Re: Federica Legger Re: Re: Re: Re: _____________________________________ Re: Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. Re: Re: _____________________________________ Re: About this discussion group: Re: Re: To Join: Send an email to Re: Re: To Post: Send an email to Re: Re: To Leave: Send an email to Re: Re: Archives: http://www.yahoogroups.com/group/c6x Re: Re: Other Groups: http://www.dsprelated.com Re: Re: Re: ">http://docs.yahoo.com/info/terms/ Re: Re: Re: -- |