Hi,
I am wondering if it is possible to interface wireless module with C6713 to
transmit data with lower data rates and to receive them on PC ?
If some one has done this before or any idea how should I start, please help
me.
Regards,
BAS
GSM/GPRS Model with C6713
Started by ●March 27, 2012
Reply by ●March 27, 20122012-03-27
BS-
> I am wondering if it is possible to interface wireless
> module with C6713 to transmit data with lower data
> rates and to receive them on PC ?
>
> If some one has done this before or any idea how
> should I start, please help me.
You might look at a small module like this:
http://www.digi.com/products/wireless-wired-embedded-solutions/solutions-on-module/digi-connect/digiconnectwime#overview
This module has a "fast RS-232" interface, which you could probably get working over McBSP on the DSK board expansion
connectors. Data rates are low, I think not higher than 3-5 Mbit/sec.
-Jeff
_____________________________________
> I am wondering if it is possible to interface wireless
> module with C6713 to transmit data with lower data
> rates and to receive them on PC ?
>
> If some one has done this before or any idea how
> should I start, please help me.
You might look at a small module like this:
http://www.digi.com/products/wireless-wired-embedded-solutions/solutions-on-module/digi-connect/digiconnectwime#overview
This module has a "fast RS-232" interface, which you could probably get working over McBSP on the DSK board expansion
connectors. Data rates are low, I think not higher than 3-5 Mbit/sec.
-Jeff
_____________________________________
Reply by ●March 28, 20122012-03-28
There are a few modules out there. Look for one with a synchronous
interface [with a clock like SPI]. Many of the modules are ASCII async
which is not McBSP friendly.
mikedunn
On 3/27/2012 12:50 PM, Jeff Brower wrote:
>
>
> BS-
>
> > I am wondering if it is possible to interface wireless
> > module with C6713 to transmit data with lower data
> > rates and to receive them on PC ?
> >
> > If some one has done this before or any idea how
> > should I start, please help me.
>
> You might look at a small module like this:
>
> http://www.digi.com/products/wireless-wired-embedded-solutions/solutions-on-module/digi-connect/digiconnectwime#overview
>
> This module has a "fast RS-232" interface, which you could probably
> get working over McBSP on the DSK board expansion
> connectors. Data rates are low, I think not higher than 3-5 Mbit/sec.
>
> -Jeff
interface [with a clock like SPI]. Many of the modules are ASCII async
which is not McBSP friendly.
mikedunn
On 3/27/2012 12:50 PM, Jeff Brower wrote:
>
>
> BS-
>
> > I am wondering if it is possible to interface wireless
> > module with C6713 to transmit data with lower data
> > rates and to receive them on PC ?
> >
> > If some one has done this before or any idea how
> > should I start, please help me.
>
> You might look at a small module like this:
>
> http://www.digi.com/products/wireless-wired-embedded-solutions/solutions-on-module/digi-connect/digiconnectwime#overview
>
> This module has a "fast RS-232" interface, which you could probably
> get working over McBSP on the DSK board expansion
> connectors. Data rates are low, I think not higher than 3-5 Mbit/sec.
>
> -Jeff
Reply by ●March 28, 20122012-03-28
BS,
You can consider this :
http://focus.ti.com/wireless/docs/wirelessoverview.tsp?familyId 03§ionIdd6&tabId'35
Ju-Hun
________________________________
From: Jeff Brower
To: BS
Cc: c...
Sent: Wednesday, March 28, 2012 2:50 AM
Subject: Re: [c6x] GSM/GPRS Model with C6713
BS-
> I am wondering if it is possible to interface wireless
> module with C6713 to transmit data with lower data
> rates and to receive them on PC ?
>
> If some one has done this before or any idea how
> should I start, please help me.
You might look at a small module like this:
http://www.digi.com/products/wireless-wired-embedded-solutions/solutions-on-module/digi-connect/digiconnectwime#overview
This module has a "fast RS-232" interface, which you could probably get working over McBSP on the DSK board expansion
connectors. Data rates are low, I think not higher than 3-5 Mbit/sec.
-Jeff
You can consider this :
http://focus.ti.com/wireless/docs/wirelessoverview.tsp?familyId 03§ionIdd6&tabId'35
Ju-Hun
________________________________
From: Jeff Brower
To: BS
Cc: c...
Sent: Wednesday, March 28, 2012 2:50 AM
Subject: Re: [c6x] GSM/GPRS Model with C6713
BS-
> I am wondering if it is possible to interface wireless
> module with C6713 to transmit data with lower data
> rates and to receive them on PC ?
>
> If some one has done this before or any idea how
> should I start, please help me.
You might look at a small module like this:
http://www.digi.com/products/wireless-wired-embedded-solutions/solutions-on-module/digi-connect/digiconnectwime#overview
This module has a "fast RS-232" interface, which you could probably get working over McBSP on the DSK board expansion
connectors. Data rates are low, I think not higher than 3-5 Mbit/sec.
-Jeff
Reply by ●April 2, 20122012-04-02
Hi Guys,
Thanks a lot for your help. I will look through them and get back to you for any query.
Regards,
BAS
________________________________
From: mikedunn
To: Jeff Brower
Cc: BS ; c...
Sent: Wednesday, March 28, 2012 6:20 AM
Subject: Re: [c6x] GSM/GPRS Model with C6713
There are a few modules out there. Look for one with a synchronous interface [with a clock like SPI]. Many of the modules are ASCII async which is not McBSP friendly.
mikedunn
On 3/27/2012 12:50 PM, Jeff Brower wrote:
>BS-
>
>> I am wondering if it is possible to interface
wireless
>> module with C6713 to transmit data with lower data
>> rates and to receive them on PC ?
>>
>> If some one has done this before or any idea how
>> should I start, please help me.
>
>You might look at a small module like this:
>
>http://www.digi.com/products/wireless-wired-embedded-solutions/solutions-on-module/digi-connect/digiconnectwime#overview
>
>This module has a "fast RS-232" interface, which you could
probably get working over McBSP on the DSK board expansion
>connectors. Data rates are low, I think not higher than
3-5 Mbit/sec.
>
>-Jeff
>
Thanks a lot for your help. I will look through them and get back to you for any query.
Regards,
BAS
________________________________
From: mikedunn
To: Jeff Brower
Cc: BS ; c...
Sent: Wednesday, March 28, 2012 6:20 AM
Subject: Re: [c6x] GSM/GPRS Model with C6713
There are a few modules out there. Look for one with a synchronous interface [with a clock like SPI]. Many of the modules are ASCII async which is not McBSP friendly.
mikedunn
On 3/27/2012 12:50 PM, Jeff Brower wrote:
>BS-
>
>> I am wondering if it is possible to interface
wireless
>> module with C6713 to transmit data with lower data
>> rates and to receive them on PC ?
>>
>> If some one has done this before or any idea how
>> should I start, please help me.
>
>You might look at a small module like this:
>
>http://www.digi.com/products/wireless-wired-embedded-solutions/solutions-on-module/digi-connect/digiconnectwime#overview
>
>This module has a "fast RS-232" interface, which you could
probably get working over McBSP on the DSK board expansion
>connectors. Data rates are low, I think not higher than
3-5 Mbit/sec.
>
>-Jeff
>