The JTAG port is used both for debugging software in development and for boundary scan hardware test in production. Most of the PLD vendors provide support in their programming software for other devices in the scan chain. But I have received mixed advice on putting TI DSPs in a scan chain with other devices. TI has lots of literature saying you can do this and Code Composer seems to offer support for this. But when I asked TI support about it, they said they don't advise you to try it, but to put the DSP on its own JTAG port with no other devices. Seems TI can't make up its mind about whether or not they wish to support JTAG for boundary scan. Anyone have any experience with this? Have you used TI DSPs in a scan chain with other devices such as FPGAs and MCUs? Rick Collins Arius - A Signal Processing Solutions Company Specializing in DSP and FPGA design http://www.arius.com 4 King Ave 301-682-7772 Voice Frederick, MD 21701-3110 301-682-7666 FAX |
CC and JTAG with other devices in the scan chain
Started by ●May 29, 2003
Reply by ●May 30, 20032003-05-30
Hi,
Kindly find the answers embedded inside the
mail.
|
Reply by ●May 30, 20032003-05-30
akalya wrote: > > Hello: > > Recently bought a IEKC64x board from ATEME. I would like to use it as > stand-alone and connect to the PC's parallel port just as I use the > C6711 DSK (i.e. use CCS and download *.out files to the board and > run) ; but there is no embedded emulator like in the 6711DSK where we > connect to the parallel port of the DSK. There are no such cables in > this (expensive) box from ATEME (nor help! ). > > Would like to know whether I just need a cable connecting the PC's > parallel port to the 14-pin JTAG slot of the IEKC64X or would I also > need an external XDS510 emulator. > > Also, how would I use the J5 header (14-pin JTAG port) in the > C6711DSK ? Is this different from using the JTAG port on the > IEKC64X ? > > Really appreciate any help, > > Thank you very much, > ka > > _____________________________________ > Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > > To Post: Send an email to > > To Leave: Send an email to > > Archives: http://www.yahoogroups.com/group/c6x > > Other Groups: http://www.dsprelated.com > ">http://docs.yahoo.com/info/terms/ There is a JTAG emulator over parallel port from Spectrum digital, that you can buy and use on the IEKC64x board from ATEME. Regards Jagadeesh Sankaran |
Reply by ●June 3, 20032003-06-03
> From: Jean-Michel MERCIER [mailto:] > Sent: 30 May 2003 13:59 > To: > > Note that Kane Computing, a major UK based DSP Tools > distrutor have done a very interresting survey on > emulators with performance comparisons. > Check their web site. I am currently working on a new revision of the Emulator Technical Comparison that Jean-Michel mentioned. I hope to have it ready in the next week or so. If anyone here is interested in having a copy then drop me an email and I will send you the new version as soon as I finish it. Best Regards, Kevin Howson Technical Manager Kane Computing Limited www.kanecomputing.com |