Forums

change bootcode for automatic program-execution on C6713 ?

Started by olaf636 July 11, 2003
is it possible to change any (e)eprom on the C6713 that when i connect
the dsk-board with powersupply the cpu starts automatic a selfmade
program ?
so that i have not to load the program via external hardware....? sincerely,
olaf lindner



Olaf,
 
Do you notice the lights that come on when you plugin the 6713 DSK - that is from a program loaded into Flash.  Lookup up the FlashBurn utility in the help file...
 
mikedunn

olaf636 <c...@t-online.de> wrote:
is it possible to change any (e)eprom on the C6713 that when i connect
the dsk-board with powersupply the cpu starts automatic a selfmade
program ?
so that i have not to load the program via external hardware....?sincerely,
olaf lindner
_____________________________________
Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group.

_____________________________________
About this discussion group:

To Join: Send an email to c...@yahoogroups.com

To Post: Send an email to c...@yahoogroups.com

To Leave: Send an email to c...@yahoogroups.com

Archives: http://www.yahoogroups.com/group/c6x

Other Groups: http://www.dsprelated.com