i have to change the CPLD MISC-register to redirect the McBSP-signals to the peripheral expansion connector, but where i can do this ?? sincerely, olaf lindner |
|
McBSP on the C6713 -DSK
Started by ●August 13, 2003
Reply by ●August 14, 20032003-08-14
Hello Olaf,
I do not have access the 6713 DSK sw at the moment, but this is what I
remember...
The address is in the 0x9000000 range. I found the info in the 6713
DSK specific help file [most likely under CPLD or memory map].
If you still can't find it, try going to the search tab and searching
for '0x900' - you will get several hits but you should find it.
mikedunn
olaf636 <c...@t-online.de> wrote: i have to change the CPLD MISC-register to redirect the McBSP-signals
|