my prof gave me a job to program the C6713-DSK to receive music at the
LINE_IN and to transmit it via the McBSP0 or 1-port to another
C6713-DSK -McBSP and finally transmit it to those LINE_OUT.
but do i understand the technical reference right, that i can use the
ports either with the codec for sampling *or* with daughtcards ?
sincerely,
olaf lindner
Reply by Mike Dunn●November 19, 20032003-11-19
Hello Olaf,
I do not have my 6713 docs handy, but I seem to remember that only 1 McBSP
is required to R/W the AIC23 and it is configurable as either the codec or
daughtercard. I believe that the other port is available If
the docs are not clear, check the schematics.
mikedunn
olaf636 <c...@t-online.de>
wrote:
hi all !
my prof gave me a job to program
the C6713-DSK to receive music at the LINE_IN and to transmit it via the
McBSP0 or 1-port to another C6713-DSK -McBSP and finally transmit it to
those LINE_OUT.
but do i understand the technical reference right,
that i can use the ports either with the codec for sampling *or* with
daughtcards ?sincerely,
olaf
lindner_____________________________________ Note: If you do a simple
"reply" with your email client, only the author of this message will receive
your answer. You need to do a "reply all" if you want your answer to be
distributed to the entire group.
_____________________________________ About this discussion group: