Forums

RTDX

Started by Unknown February 22, 2004
Hi,

(c6711DSK, CCS 2.1)
I nedd some information about RTDX:

1. Can I use RTDX via parallel port(or only with Jtag connector)?
2. Can I set(change) the value of variables via RTDX in real-time while
the code is runing on the target?

Thanks



(Q1) By parallel port do you mean a parallel port emulator (i.e.
still JTAG)or do you mean hardware with a general parallel port
connection?

(Q2) That is the idea of RTDX, but the raw tools available from TI
typically require you to hardcode a send/receive message for a
particular variable or memory location.

We have techniques that extend or replace RTDX to allow:
(1) inspecting and changing values of any arbitrary variable or
memory location(s) without changing the DSP side code (done in Real-
time)

(2) Allow this type of functionality to work over a serial port with
no JTAG connection (or even CCS) required.

Let me know if you'd like more info (or check out our web-site)

-Shawn
www.appliedsignalprocessing.com --- In , Per Attila <fank23@f...> wrote:
> Hi,
>
> (c6711DSK, CCS 2.1)
> I nedd some information about RTDX:
>
> 1. Can I use RTDX via parallel port(or only with Jtag connector)?
> 2. Can I set(change) the value of variables via RTDX in real-time
while
> the code is runing on the target?
>
> Thanks