Is it possible for a few DM642 to be stacked together to
form a multiprocessor setup?
Thanks.
Reply by Mike Dunn●June 25, 20042004-06-25
Hello addict,
The answer is yes - my thoughts would be...
You could use "store bought [or scrounged] parts" and some software
with the first two implementations.
1. ethernet - connect each board to a 100M switch on their own private
network
2. PCI - use a PC [or a PCI backplane with one SBC to perform the PCI
enumeration].
You could also design a daughtercard that communicated with 4 or 8 DM642s
via shared memory, FIFOs, or multiported mem.
You should really be able process some serious video or ???
mikedunn
c64addict <c...@yahoo.com> wrote:
hi all,
Is it possible for a few DM642 to
be stacked together to form a multiprocessor setup?
Thanks.
_____________________________________ Note: If you do a simple
"reply" with your email client, only the author of this message will receive
your answer. You need to do a "reply all" if you want your answer to be
distributed to the entire group.
_____________________________________ About this discussion group: