C6713DSK to Simulink data transfer

Started by bogdan June 16, 2006
Dear All,

I have implemented an OFDM communication system in Simulink. I am using
Link to CCS and CCSv3.1 Platinum to build the model and transfer data to
one TI C6713 board. The output of the board goes to the input of a
second C6713 board.

The problem is I do not know how to transfer the received data (from the
second board) back to Simulink.

Using the Line in ADC block digitizes and transfers the received data to
the board processor. Can I use a RTDX channel to transfer the data to
Simulink again?
If yes please tell me how!! If there are other solutions please let me know!

Best regards,