Forums

connecting to DSP on DM6446

Started by namana maji October 16, 2006
Hi,
Could anyone tell me if it is possible to connect to the DSP on DM6446 directly using JTAG?
Thanks & Regards,
Namana

---------------------------------

Send FREE SMS to your friend's mobile from Yahoo! Messenger Version 8. Get it NOW
Yes it is possible to connect to the DSP on DM6446 directly using JTAG.
You have to sure that the ARM don't hold the DSP in reset state.
you can do that by simple code in gel file or by setting the DSP to non
boot mode.
you can download ICEPICK JTAG configuration from spectrum digital web
site.
Good Luck
The content of this message is Applied Materials Confidential. If you are
not the intended recipient and have received this message in error, any
use or distribution is prohibited. Please notify me immediately by reply
e-mail and delete this message from your computer system. Thank you.

namana maji
Sent by: c...
16/10/2006 08:32

To
c...
cc

Subject
[c6x] connecting to DSP on DM6446

Hi,
Could anyone tell me if it is possible to connect to the DSP on DM6446
directly using JTAG?
Thanks & Regards,
Namana