Ricardo,
On 10/24/07, Ricardo Jose de Oliveira Carvalho wrote:
> Hi,
>
> I am working with CCS 3.1
>
> Firstly a used the XDS510, via JTAG, to connect a 6713DSK with successful.
>
> Now I am trying uses it to connect a new board with a 6713B DSP, and I have
been a fatal error:
>
> Error connecting to the target: Error 0x80000200/-1070 Fatal Error during:
OCS,
>
> Does somebody know what I have to do in order to solve this fatal error?
1. Make sure that your target is alive. Check voltages and clocks.
2. Check your JTAG scan chain. From a DOS prompt in cc/bin directory
run 'xdsprobe -i'. Examine the output for successful completion
and
an IR len of 46 [assuming that the DSP is the only thing in the scan
path]. You can compare with the DSK output.
If you get errors, run 'xdsprobe -g -c' and check the JTAG
connector
pins 3 and 7 for 'toggling data', pins 9 and 11 for clocks and that
pin 2 is high.
mikedunn
>
> Thanks.
>
> Ricardo Carvalho.
>
> LQE FURB
>
> Blumenau
>
> Brazil
>
