while trying to flash a 2808 on a eZdsp TMS320F2808 board I got this error:
http://cs.bemidjistate.edu/shgoble/e1.JPG
Looking around on the web suggested that I try Depletion Recover (Using the CCS
On-Chip Flash Programmer), this produced:
http://cs.bemidjistate.edu/shgoble/e2.JPG
I'm very new to CCS and don't have much for mentors to learn from -
really I'm trying to figure this out in a near total vacuum.
_____________________________________
API error
Started by ●June 10, 2009
Reply by ●June 28, 20092009-06-28
As best I can tell the flash on this chip will never be usable again. I've
been led to believe I had the flash programmer set with some 'bad'
settings and have since been using:
OSCCLK: 20
DIV: 2
PLLCR: 10
Cheers
--- In c..., "sr_gamer" wrote:
>
> while trying to flash a 2808 on a eZdsp TMS320F2808 board I got this error:
> http://cs.bemidjistate.edu/shgoble/e1.JPG
>
> Looking around on the web suggested that I try Depletion Recover (Using the CCS On-Chip Flash Programmer), this produced:
>
> http://cs.bemidjistate.edu/shgoble/e2.JPG
>
> I'm very new to CCS and don't have much for mentors to learn from - really I'm trying to figure this out in a near total vacuum.
>
_____________________________________
OSCCLK: 20
DIV: 2
PLLCR: 10
Cheers
--- In c..., "sr_gamer" wrote:
>
> while trying to flash a 2808 on a eZdsp TMS320F2808 board I got this error:
> http://cs.bemidjistate.edu/shgoble/e1.JPG
>
> Looking around on the web suggested that I try Depletion Recover (Using the CCS On-Chip Flash Programmer), this produced:
>
> http://cs.bemidjistate.edu/shgoble/e2.JPG
>
> I'm very new to CCS and don't have much for mentors to learn from - really I'm trying to figure this out in a near total vacuum.
>
_____________________________________
