I'm using the simulator for the TI C3X DSP, and I set a memory map range 0x00800000 - 0x0080FFFF, set as RAM. Everytime i set this value, and restart code composer, I get an error saying: Can't Add Memory Map Add Memory Map Failed: Address: 0x800000 Length: 0x10000 Page: 0 And then code composer loads up and i check the memory map and that range is set back to NONE instead of RAM. Need help please. Thanks. Also, If that is impossible, or if anyone knows otherwise, I need to be able to access external RAM but I don't know how to do it. If anyone could hook me up with this information or point me in the right direction, I would appreciate it. Thank you! |
Memory Map
Started by ●November 30, 2001